Abstract:Particle coating is a very important step in many industrial production processes as the particle coating layers may fix surfaces with unique advantages. Given the limitation and disadvantages of the existing simulation methods, a coupled CFD-DEM-CVD multi-physical field model for particle-coating simulations has been established taking into account the velocity field, temperature field, concentration field, and deposition model. In this model, gas behavior and chemical reactions are simulated in the CFD frame based on the conservation laws of mass, momentum, and energy. The particle behavior is simulated in the DEM frame based on the gas-solid interphase force model and contact force model. The deposition behavior is simulated in the CVD frame based on the particle movement-adhesion-deposition model. The coupled model can be implemented in Fluent-EDEM software with their user definition function and application programming interface. The particle coating process involving the pyrolysis of acetylene was investigated, and the effect of bed temperature and inlet gas velocity on deposition rate and coating efficiency were investigated based on the proposed model with adjustable deposition coefficients. Both the average deposition layer mass and the average deposition layer thickness were found to be proportional to the elapsed time and increased at the rate of about 1.05 x 10(-2) mg/s and 3.45 x 10(-4) mm/s, respectively, setting the inlet gas velocity to 11 m/s and bed temperature to 1680 K. A higher temperature and larger inlet gas velocity lead to a larger deposition rate, but the coating efficiency decreases because of limits imposed by the chemical reaction. At a bed temperature of 1280 K, the average deposition rate is 7.40 x 10(-3) mg/s when the inlet gas velocity is set to 11 m/s, which is about double the deposition rate when the inlet gas velocity is set as 5 m/s. The proposed model can provide some guidance for the operating conditions and parameters design of the spouted bed in actual coating settings and can also be further developed as a basic model of mechanisms to integrate detailed information across multiple scales. (C) 2018 Chinese Society of Particuology and Institute of Process Engineering, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Scale-up Strategy Study of Coating Furnace for TRISO Particle Fabrication Based on Numerical Simulations

Experimental study on the scale-up of a multi-ring inclined nozzle spout-fluid bed by electrical capacitance tomography

Optimization design of the coating furnace by 3-d simulation of spouted bed dynamics in the coater

Preliminary simulation study of particle coating process by FB-CVD method using a CFD-DEM-PBM model

DEM Simulation for Separating Coated Fuel Particles by Inclined Vibrating Plate

Preparation of the Coated Nuclear Fuel Particle Using the Fluidized Bed-chemical Vapor Deposition (FB-CVD) Method

Multi‐scale study of fluidized bed‐chemical vapour deposition process in nuclear fuel coated particle fabrication for high‐temperature gas‐cooled reactor: A review

CFD–DEM–CVD Multi-Physical Field Coupling Model for Simulating Particle Coating Process in Spout Bed

Computational Fluid Dynamics‐based Steam Cracking Furnace Optimization Using Feedstock Flow Distribution

Author Response for "multi‐scale Study of Fluidized Bed‐chemical Vapour Deposition Process in Nuclear Fuel Coated Particle Fabrication for High‐temperature Gas‐cooled Reactor: A Review"

Investigation on Validation of Scale-Up Manufacture Technologies of Overcoating Particles for HTR Fuel Elements

An Improved Design of TRISO Particle with Porous SiC Inner Layer by Fluidized Bed-Chemical Vapor Deposition

Strategy for Scaling‐up of a Microsieve Dispersion Reactor

CFD-DEM simulation of particle coating process coupled with chemical reaction flow model

Preparation of ZrC Coating in TRISO Fuel Particles by Precise Transportation of Solid Precursor and Its Microstructure Evolution

CFD Aided Design of Integrated Spray Pyrolysis Furnace for Liquid Ore Exploitation

System pressure assessment and optimization of coated fuel particle production line

A Numerical Study on the Process of the H2 Shaft Furnace Equipped with a Center Gas Distributor

Design and preparation of SiC based novel coated fuel particle

CFD-DEM Simulation of High Density Particles Fluidization Behaviors in 3D Conical Spouted Beds

Multidimensional Multiphysics Modeling of TRISO Particle Fuel with SiC/ZrC Coating Using Modified Fission Gas Release Model