Abstract:Electrohydrodynamic atomization coating technology is well-suited for micro-/nanoscale thin-film additive manufacturing. However, there are still some challenges in quality control and parameter adjustment during the coating process. Especially when coating on nonconductive and nonhydrophilic substrates, film quality and thickness uniformity are difficult to control. This paper proposes an optimization strategy for enhancing the efficiency and quality of thin-film manufacturing on nonconductive, nonhydrophilic glass substrates. In this paper, a visual inspection system was developed for in situ inspection and identification of droplet deposition states in the substrate surface. Then, the statistical relationship between the operating parameters and the quality of the deposition state was analyzed by response surface methodology. On this basis, machine learning models and intelligent recommendation frameworks for small data sets were developed to rapidly optimize operating parameters and improve the quality of thin-film coating. Optimization strategy developed by applying the principles of statistical modeling, analysis of variance, and global optimization are more efficient and less costly than traditional parameter screening methods. The experimental results show that optimum deposition quality can be obtained with the recommended operating parameters. And, validation results show a 12.8% improvement in film thickness uniformity. At the same time, no mura defects appeared on the thin-film surface. The proposed optimization strategy can improve the efficiency and quality of additive manufacturing of micro and nano thin films and is beneficial for advancing industrial applications of the electrohydrodynamic atomization coating.

Investigation on Validation of Scale-Up Manufacture Technologies of Overcoating Particles for HTR Fuel Elements

Overcoating Process and Equipments Development in Manufacture of Fuel Elements for HTR-PM

Research on the Overcoating Process in the Manufacture of Spherical Fuel Elements for HTGR

Key Process of Overcoating for Coated Particles in Manufacture of Fuel Elements for HTGR

Investigation of the Vibrating Feeding System for Sphericity Separation of Coated Fuel Particles Using DEM

Preparation of Spherical Fuel Elements for Htr-Pm in Inet

Dem Simulation of Particle Mixing for Optimizing the Overcoating Drum in Htr Fuel Fabrication

DEM Simulation for Separating Coated Fuel Particles by Inclined Vibrating Plate

Scale-up Strategy Study of Coating Furnace for TRISO Particle Fabrication Based on Numerical Simulations

DEM Investigation of the Conveyor Belt Sorting System for Coated Fuel Particles with a Large Feeding Rate

DEM-DDM Investigation of the Tablet Coating Process Using Different Particle Shape Models

Design and development on automated control system of coated fuel particle fabrication process

System pressure assessment and optimization of coated fuel particle production line

Application of Near-Infrared Spectroscopy Combined with Design of Experiments for Process Development of the Pulsed Spray Fluid Bed Granulation Process

Research and Manufacture of Spherical Fuel Element for HTR-PM Demonstration Project

Scale-up of dry impregnation processes for porous spherical catalyst particles in a rotating drum: experiments and simulations

Design and Scale up of a Mixing Process for a Novel Automotive Coating

Multiobjective Optimization Strategy for Enhancing the Efficiency and Quality of Organic Thin-Film Manufacturing with Electrohydrodynamic Atomization Coating

Research and Development on the First-loading Coated Fuel Particles for the 10 MW High Temperature Gas-cooled Reactor

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix