Abstract:The issue of determining the stress-strain state during creep in models of rotors of steam and gas turbines is considered. The formulation of the problem is based on the general approach of Solid Mechanics using incremental theory to describe creep strains. The Finite Element Method was used as a solution method in the implementation of professional engineering software. The influence of the centrifugal forces on the stress-strain state, which varies during 10,000 hours of creep of the rotor material, is analyzed. Two models of the rotor are considered: a simplified cylindrical and a drum-type rotor, which is described by the geometry of the body of revolution and which consists of several cylindrical parts. Due to the symmetry of the models, the calculation schemes are built on the basis of the use of a two-dimensional finite element of the body of revolution. Algorithms are applied for the preparation of input data can be recommended for use in the design practice of energy industry enterprises. The Norton law was used for creep calculations. The creep of the models in different temperature conditions with the use of various steels used in turbo-building as their material was analyzed. According to the results of the performed computer simulation of the creep of rotor models, the levels of deformation and the nature of the redistribution of stresses that occur under the same load by centrifugal forces in different temperature conditions caused by the operational processes in the turbine have been established. The stress and strain levels in the drum-type rotor were analyzed and the most loaded and deformed areas of it were determined. It is noted that according to the simulation data for the considered model of the drum-type rotor, the level of accumulated strains, is moderate and does not exceed 0.4%, which is suitable from the point of view of the analysis of operational properties.

Evolution of Principal Stress of a Turbine Rotor under Cyclic Thermo-Mechanical Loading

Calculation of Finite Element of Thermal Stress and Analysis of Low-cyclic Fatigue Life for Non-central Hole Rotor of 135 MW Turbine

Continuum Damage Mechanics-Based Analysis of Creep–fatigue Interaction Behavior in a Turbine Rotor

Influence of creep on Low-cycle Fatigue Strain of Ultra-supercritical Steam Turbine Rotor

Computer simulation of a rotor creep

Influence Of Creep On Low-Cycle Fatigue Life Assessment Of Ultra-Supercritical Steam Turbine Rotor

Study of Creep-Fatigue Behavior in A 1000 Mw Rotor Using A Phenomenological Lifetime Model

Study of Creep–fatigue Behavior in a 1000 MW Rotor Using a Unified Viscoplastic Constitutive Model with Damage

Application of A Creep-Damage Constitutive Model for the Rotor of A 1000mw Ultrasupercritical Steam Turbine

Viscoplastic Model-Based Analysis of In-Service Oscillation Temperature and Thermal Stress in a Rotating Component

ON THE FATIGUE-CREEP DAMAGE ANALYSIS OF A STEAM TURBINE ROTOR BY A NONLINEAR CONTIMUUM DAMAGE MECHANICS MODEL

Influence of High-Temperature Dwell Time on Creep-Fatigue Behavior in A 1000 Mw Steam Turbine Rotor

Creep Failure Behavior of Notched Structure in the Simulated Steam Turbine Rotor: Experimental and Damage Analysis

Constitutive Model Based Efficient Creep-Fatigue Damage Computation Technique for Steam Turbine Rotors to Enhance Flexible Operational Capabilities

Modeling the Creep Damage Effect on the Creep Crack Growth Behavior of Rotor Steel

On the Creep Fatigue and Creep Rupture Behaviours of 9–12% Cr Steam Turbine Rotor

Numerical Investigation of Creep–Fatigue Behavior in a Steam Turbine Inlet Valve under Cyclic Thermomechanical Loading

Strength Analysis of High-temperature Creep for a 660MW Ultra-Supercritical Steam Turbine High-pressure Rotor

Multiaxial Creep-Fatigue Life Prediction on the Rotor of a 1000MW Supercritical Steam Turbine

Patterns of Transverse Crack Growth in a Steam Turbine Rotor Model Under Dynamic Loading

Study on Stress Corrosion Cracking Growth of Turbine Rotor in Power Plant