Abstract:Although hard carbon has been considered as one of the most promising anodes for sodium-ion batteries, however, the poor performance and ambiguous sodium storage mechanism limit the further development. Herein, a novel epoxy phenol novolac resin is used as precursor for the first time to construct excellent electrochemical performance anode by pyrolyze it at different temperature. The results demonstrate that the plateau region in discharge curve of hard carbon is ascribed to Na insertion into the long-range ordered carbon structure. Improving ordering degree with suitable interlayer distance can both enhance the plateau capacity and total capacity. With the increasing of pyrolysis temperature, the graphitization degree of hard carbon is gradually enhanced. The cured epoxy phenol novolac resin pyrolyzed at 1800 °C delivers the reversible capacity of 480.3 mAh g −1 at 50 mA g −1 , high initial coulombic efficiency of 84.6%, and capacity retention of 92% after 1000 cycles at 500 mA g −1 . The "adsorption-intercalation mechanism" for Na storage in EPNHC-1800 is verified by in-situ Raman spectroscopy analysis. We believe that the sodium storage mechanism of hard carbon is "adsorption-intercalation-filling", namely, the adsorption of Na-ions on the surface of carbon layers providing the slope capacity, the intercalation of Na-ions between carbon layers and filling in the nanopores providing the plateau capacity. This study offers a novel precursor to synthesize low cost and high-performance hard carbon anode material for sodium-ion batteries, delivering great opportunity for the commercialization of anode.

Scale-Up Synthesis and Characterization of Epoxyphenolics Based Pyrolysis Carbons As Highly-Performed Anodes for Li-Ion Batteries

Rapid, tunable synthesis of porous carbon xerogels with expanded graphite and their application as anodes for Li-ion batteries

Epoxy resin-derived N, P co-doping hard carbon with improved yield and anode performance in Li-ion battery

Epoxy phenol novolac resin: A novel precursor to construct high performance hard carbon anode toward enhanced sodium-ion batteries

Pyrolytic Polyurea Encapsulated Natural Graphite As Anode Material for Lithium Ion Batteries

Catalytic Decomposition of Ethylene Carbonate by Pyrrolic-N to Stabilize Solid Electrolyte Interphase on Graphite Anode under Extreme Conditions

Effects of Pyrolysis on High-Capacity Si-Based Anode of Lithium Ion Battery with High Coulombic Efficiency and Long Cycling Life

Coal-Based Semicoke-Derived Carbon Anode Materials with Tunable Microcrystalline Structure for Fast Lithium-Ion Storage

Ion-Catalyzed Synthesis of Microporous Hard Carbon Embedded with Expanded Nanographite for Enhanced Lithium/Sodium Storage

Tailoring the Microstructure of Porous Carbon Spheres as High Rate Performance Anodes for Lithium-Ion Batteries

Mass Production of Large-Pore Phosphorus-Doped Mesoporous Carbon for Fast-Rechargeable Lithium-Ion Batteries

Fabrication of Carbon Nanofiber-Driven Electrodes from Electrospun Polyacrylonitrile/Polypyrrole Bicomponents for High-Performance Rechargeable Lithium-Ion Batteries

Three-dimensional Porous Structure CoP/N-doped Carbon Nanospheres As Anode for Enhanced Lithium Storage Performance

Nanoporous Carbon as Anode Material of High Rate Capability for Lithium Ion Batteries

Engineering Microstructure of a Robust Polymer Anode by Moderate Pyrolysis for High-Performance Sodium Storage

Freestanding and Consecutive Intermixed N-Doped Hard Carbon@Soft Carbon Fiber Architectures as Ultrastable Anodes for High-Performance Li-Ion Batteries

Preparation of Highly Pyrrolic‐Nitrogen‐Doped Carbon Aerogels for Lithium‐Sulfur Batteries

Artificially regulated interphase on natural graphite realizes rapid charge and durable high-temperature cycling of Li-ion batteries

Three-dimensional interconnected porous carbon nanoflakes with improved electron transfer and ion storage for lithium-ion batteries

N, P co‐Doped Hard Carbon Anodes for High‐Performance Lithium‐Ion Batteries with Enhanced Capacity Retention and Cycle Stability

Hybridization of PPy/C toward high capacity and stability for sodium-ion batteries