Abstract:For decades, lithium-ion batteries have seen widespread usage in a variety of applications from consumer electronics such as smartphones to the more recent developments of electric vehicles. As the usage of lithium for batteries increases, one growing concern is the finite amount that could be found within the Earth’s crust. An alternative that is being considered is sodium-ion batteries due to how plentiful sodium is in the Earth’s crust and similar chemical properties to lithium. One of the main challenges of sodium-ion batteries is the development of anode materials because sodium does not intercalate well with graphite, which is one of the most used materials in lithium-ion batteries. One promising development for anode materials is the use of hard carbon derived from the pyrolysis of polymers such as polyacrylonitrile (PAN) which can have various morphologies and potential for doping. Our work will focus on carbon nanofibers which show high 1-dimensional transport capabilities. With the addition of a sacrificial material such as polymethylmethacrylate (PMMA) that will be removed entirely during the pyrolysis step, PAN/PMMA can be made into porous carbon nanofibers to further increase ion transport. When a PAN/PMMA blend is used, the pores are very random with a high degree of variation of pore characteristics, however studies have shown that the creation of a PAN-b-PMMA block copolymer would allow for more uniform pore structures. Our work intends to study the effects of pore structures on the electrochemical characteristics of porous carbon nanofiber anodes for sodium-ion batteries. The cycling stability data of coin cells made using hard carbon nanofibers derived from electrospun PAN (Nonporous), PAN/PMMA (Random Porous), and PAN-b-PMMA (Uniform Porous), shows their respective discharging specific capacities (mAh/g) at 0.1 A/g average at about 80, 116, and 175. A slight increase can be seen with the addition of random, nonuniform pores to the PAN hard carbon, however, with the highly uniform and controlled pores resulting from the pyrolysis of the PAN-b-PMMA block copolymer, a very significant increase in the discharging specific capacity can be seen.

Engineering Microstructure of a Robust Polymer Anode by Moderate Pyrolysis for High-Performance Sodium Storage

Achieving High Initial Coulombic Efficiency for Competent Na Storage by Microstructure Tailoring from Chiral Nematic Nanocrystalline Cellulose

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Engineering Block Copolymer-Derived Porous Carbon Nanofibers as Anodes for Sodium Ion Batteries

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

3D Interconnected and Multiwalled Carbon@MoS 2 @Carbon Hollow Nanocables as Outstanding Anodes for Na-Ion Batteries.

Pyrolysis of naphthol functionalized polytriarylamine for efficient sodium-ion storage

Hierarchical Self-Supported Carbon Nanostructure Enables Superior Stability of Highly Nitrogen-Doped anodes

N, S self‐doped porous carbon with enlarged interlayer distance as anode for high performance sodium ion batteries

Demystifying In Situ Pyrolysis Chemistry for High-Performance Polyanionic Cathodes in Sodium-Ion Batteries

Scale-Up Synthesis and Characterization of Epoxyphenolics Based Pyrolysis Carbons As Highly-Performed Anodes for Li-Ion Batteries

Hybridization of PPy/C toward high capacity and stability for sodium-ion batteries

High-yield Microstructure-Controlled Amorphous Carbon Anode Materials Through a Pre-Oxidation Strategy for Sodium Ion Batteries

Control of the structure and composition of nitrogen-doped carbon nanofoams derived from CO2 foamed polyacrylonitrile as anodes for high-performance potassium-ion batteries

Exploring Carbonization Temperature to Create Closed Pores for Hard Carbon As High-Performance Sodium-Ion Battery Anodes

Internal Interface Engineering of Yolk-Shell Structure toward Fast and Robust Potassium Storage

Liquid Gallium‐Assisted Pyrolysis of MOF Affording CNT Non‐Hollow Frameworks in High Yields for High‐Performance Sodium‐Ion Battery Anode

A Robust Integrated SnOx/Carbon Composite Anode for Sodium-Ion Batteries

Pore structure and oxygen content design of amorphous carbon toward a durable anode for potassium/sodium‐ion batteries

Porous-Carbon Aerogels with Tailored Sub-Nanopores for High Cycling Stability and Rate Capability Potassium-Ion Battery Anodes

Regenerated Graphite-Derived Cellular-Inspired Polydopamine@NiO@Graphite toward Robust Lithium Storage