Abstract:The porous carbon blacks rationally designed by a facile yet efficient NH3 thermal etching route have been investigated as anode materials in an ether-based electrolyte for sodium-ion batteries. The as-synthesized CBN35 carbon black with a 35% weight loss after NH3 thermal etching exhibited a large specific charge capacity of 352 mAh g−1 at 50 mA g−1 and a superior rate capability of 101 mAh g−1 at 16000 mA g−1, due to its highest microporosity, an appropriate surface area, a desirable microstructure, and a promising hybrid intercalation mechanism. Impressively, even cycled at 1600 mA g−1 over 3200 cycles, an outstanding reversible capacity of 103 mAh g−1 with a negligible 0.0162% capacity loss per cycle can still be achieved. Based on the multimodal characterizations including the structural probes of phase evolution for carbon materials, the electrochemical techniques, and the surface-sensitive XAS measurements, the exceptional electrochemical properties should stem from several merits of modified carbon black system. While the particular microporous structure provides relatively more accessible sodium storage sites, a novel hybrid intercalation mechanism in ether-based electrolyte would incorporate the sodium ion insertion into the disordered structure with the solvated sodium ion species co-intercalation into the graphitic phase. In addition to the diffusion-controlled redox reactions, the noticeable surface-induced pseudocapacitive reactions also significantly contribute to the charge storage upon sodiation and guarantee the rapid migrations of sodium ions/solvated compounds. This system further features a controlled emergence of a robust but thin solid electrolyte interphase layer, which could suppress the side reactions of active electrode with reactive electrolyte, maintain the fragile porous structure upon cycling, and facilitate the migrations of sodium ions and solvated sodium ion compounds.

High-yield Microstructure-Controlled Amorphous Carbon Anode Materials Through a Pre-Oxidation Strategy for Sodium Ion Batteries

A Hierarchical N/S‐Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High‐Performance Sodium‐Ion Batteries

Lignin-Derived Nitrogen-Doped Porous Carbon as a High-Rate Anode Material for Sodium Ion Batteries

Boosting the sodium storage behaviors of carbon materials in ether-based electrolyte through the artificial manipulation of microstructure

Electrode Materials: A Hierarchical N/S-Codoped Carbon Anode Fabricated Facilely from Cellulose/Polyaniline Microspheres for High-Performance Sodium-Ion Batteries (Adv. Energy Mater. 6/2016)

Commercial Activated Carbon As a Novel Precursor of the Amorphous Carbon for High-Performance Sodium-Ion Batteries Anode

3D Amorphous Carbon with Controlled Porous and Disordered Structures As a High‐Rate Anode Material for Sodium‐Ion Batteries

A Soft Carbon Materials with Engineered Composition and Microstructure for Sodium Battery Anodes

High Capacity and Superior Rate Performances Coexisting in Carbon-Based Sodium-Ion Battery Anode

Sieving carbons promise practical anodes with extensible low-potential plateaus for sodium batteries

Carbon Coated Amorphous Bimetallic Sulfide Hollow Nanocubes Towards Advanced Sodium Ion Battery Anode

Scalable synthesis of N/S co-doped hard carbon microspheres as a high-performance anode material for sodium-ion batteries

Recent Progress in Amorphous Carbon‐Based Materials for Anodes of Sodium‐Ion Batteries: Synthesis Strategies, Mechanisms, and Performance

Coupled Carbonization Strategy towards Advanced Hard Carbon for High Energy Sodium-Ion Battery.

Fabricating multi-porous carbon anode with remarkable initial coulombic efficiency and enhanced rate capability for sodium-ion batteries

A Robust Integrated SnOx/Carbon Composite Anode for Sodium-Ion Batteries

Molten Salt Synthesis of Carbon Anode for High-Performance Sodium-Ion Batteries

Engineering hard carbon with high initial coulomb efficiency for practical sodium-ion batteries

ICE optimization strategies of hard carbon anode for sodium-ion batteries: from the perspective of material synthesis

Nickel-templated carbon foam anodes for sodium-ion batteries

Constructing Abundant Oxygen-Containing Functional Groups in Hard Carbon Derived from Anthracite for High-Performance Sodium-Ion Batteries