Abstract:Lithium/sulfur (Li-S) batteries have recently attracted intensive research interests due to their high theoretical specific energy of 2600 W.h.kg(-1). However, the poor electronic conductivity of sulfur and the high solubility of polysulfides in organic electrolytes lead to poor cycling stability and rate capability. Herein, we report a three-dimensional (3D) nanocomposite network made from nitrogen-doped carbon nanoribbon (NCNB) and nitrogen-doped graphene (NG), which has a high electronic conductivity and can serve as a conductive matrix and a sulfur immobilizer for the sulfur cathode. The NCNB is prepared by thermal nitridation of a unique 3D phenolic resin (PHF) isolated from the polycondensation reaction of 1,4-hydroquinone and formaldehyde. The N content of NCNB-NG can reach as high as 9.7 wt%. Although three types of N bonding geometries, including pyridinic N, pyrrolic N, and graphitic N, are identified in the NCNB-NG composites, we found the pyridinic N is dominant, which facilitates the trapping of intermediate lithium polysulfides. The sulfur was loaded on NCNB-NG by using a Na2S2O3 solution as sulfur source. The scanning electron microscope (SEM) images show that almost no large S particle can be observed in the as-prepared S@NCNB-NG nanocomposites, suggesting a uniform coating of S on the NCNB-NG networks. The transmission electron microscopic (TEM) images and the elemental mapping by Energy-Dispersive X-ray (EDX) analysis also show that nano-sized S particles are uniformly distributed on the NCNB-NG matrix. The as-obtained S@NCNB-NG cathode can deliver a high specific capacity of 1338 mA.h.g(-1) at 0.05 C with about 80% S utilization. It also exhibits excellent rate capability and good cycle stability with a retained specific capacity of 556 mA.h.g(-1) after 300th cycles. These performances are much higher than the control samples using the S@NCNB and the S@PHF nanocomposites as cathodes. The improved performance can be attributed to the unique microstructure and the improved electronic conductivity of the NCNB-NG matrix.

Preparation of Highly Pyrrolic‐Nitrogen‐Doped Carbon Aerogels for Lithium‐Sulfur Batteries

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bio-derived N-doped Porous Carbon As Sulfur Hosts for High Performance Lithium Sulfur Batteries

Sustainable Synthesis of N‐Doped Hollow Porous Carbon Spheres Via a Spray‐Drying Method for Lithium‐Sulfur Storage with Ultralong Cycle Life

Surface-coated AlF3 Nanolayers Enable Polysulfide Confinement Within Biomass-Derived Nitrogen-Doped Hierarchical Porous Carbon Microspheres for Improved Lithium-Sulfur Batteries

Preparation of Three-dimensional Nitrogen-doped Carbon Nanoribbon and Application in Lithium/Sulfur Batteries

Facile synthesis of high-content nitrogen-doped hierarchical porous carbon spheres for high-capacity lithium-sulfur batteries

Biomass Derived Nitrogen-Doped Highly Porous Carbon Material with a Hierarchical Porous Structure for High-Performance Lithium/Sulfur Batteries

Facile preparation of nitrogen-doped hierarchical porous carbon as a sulfur cathode host for high performance lithium-sulfur batteries

Fabrication of Highly N-Doped Graphene-Like Carbon Templated from G-C3n4 Nanosheets As Promising Li-ions Battery Anode

Self-Supported Hierarchically Porous 3d Carbon Nanofiber Network Comprising Ni/Co/Nico2o4 Nanocrystals and Hollow N-Doped C Nanocages as Sulfur Host for Highly Reversible Li–S Batteries

N, P co-doped mesoporous polyacenes derived from phenol-formaldehyde resin as sulfur hosts for lithium-sulfur batteries

Nitrogen-doped Porous Carbon Nanofiber Webs/sulfur Composites As Cathode Materials for Lithium-Sulfur Batteries

Facilitation of sulfur evolution reaction by pyridinic nitrogen doped carbon nanoflakes for highly-stable lithium-sulfur batteries

Porous Hollow Carbon Aerogel-Assembled Core@Polypyrrole Nanoparticle Shell as an Efficient Sulfur Host through a Tunable Molecular Self-Assembly Method for Rechargeable Lithium/Sulfur Batteries

Horizontally Aligned Lamellar Porous Graphene/nickel Composite for High Volumetric Capacity Lithium-Sulfur Batteries

Nitrogen sulfur dual-doped porous biochar fibers for high performance lithium-sulfur battery

3D Hierarchical Mesoporous Carbon with P and N Dual-doped as Electrocatalyst Host for High-performance Li-S Batteries

Defect-rich porous tubular graphitic carbon nitride with strong adsorption towards lithium polysulfides for high-performance lithium-sulfur batteries

Preparation of phosphorus-doped graphitic carbon nitride and its application in lithium-sulfur batteries

Nitrogen-Doped 3d Carbon Hybrids Based on Modified Lignin As Sulfur Host for High-Performance Lithium-Sulfur Batteries