Abstract:Silica‐filled styrene‐butadiene rubber with various particle sizes. Silica is a renewable resource that has become the primary filler for the rubber used in eco‐friendly tires. However, silica tends to agglomerate in the rubber matrix, particularly, micro‐ and nano‐scale silica, which limits its application. When ordinary‐particle‐size silica with low cost and high stacking density is modified using appropriate methods, high dispersion in rubber and good performance can be achieved with common processing equipment, which has significant engineering application value. In this study, silica particles with different sizes (nano‐scale, 19 and 45 μm) were treated with a 3‐mercaptopropyltriethoxysilane coupling agent (KH580). Subsequently, the silica with the ordinary particle size of 300 mesh (45 μm) was coated with natural latex (NL), and the mechanical properties of the modified silica‐filled styrene‐butadiene rubber (SBR)/carbon black (CB) compounds were investigated. The results revealed that the mechanical properties of the NL‐coated 45 μm silica‐filled composite improved significantly, particularly, in the area of tear strength and elongation at break, the composite properties were improved by 17.1% and 118.2%, respectively. Excellent performance over composites filled with coupling agent‐treated micron‐ and nanoscale silica. Enhancing the surface modification of silica through latex coating provides a means to improve the efficiency of industrial production and reduce costs. Highlights The low‐fine silica treated with KH580 has good dispersibility. Improved mechanical compatibility of NL‐coated silica with rubber. Improvement in strain performance of composites after NL coated with silica. The effect of silica dispersion on composite properties is greater than the effect of particle size. Industrial silica can be successfully addressed, paving the way for extensive utilization.

Effects of Octamethylcyclotetrasiloxane Grafting and in Situ Silica Particle Generation on the Curing and Mechanical Properties of a Styrene Butadiene Rubber Composite

MONTMORILLONITE REINFORCED SBR AND EFFECT ON THE VULCANIZATION OF RUBBER

Effect of nano-silica surface-capped by bis[3-(triethoxysilyl)propyl] tetrasulfide on the cure behaviors, mechanical properties, swelling resistance and microstructure of styrene-butadiene rubber/acrylonitrile-butadiene rubber nanocomposites

Improved Thermal Insulation and Mechanical Strength of Styrene-Butadiene Rubber through the Combination of Filled Silica Aerogels and Modified Glass Fiber

GLYCIDYL METHACRYLATE AS A NON-SILANE MODIFIER IN RUBBER/SILICA COMPOSITES

Effect of silica particle size and coating by natural latex on properties of styrene‐butadiene rubber/carbon black/silica composites

Reactive grafting of hydroxyethyl acrylate in styrene butadiene rubber: Characterization and its effect on silica reinforced tire composites

Studies on Multilayer Microstructure of Nanosilica Filled Carboxylated Styrene-Butadiene Rubber

Effects of modified silica on the co‐vulcanization kinetics and mechanical performances of natural rubber/styrene–butadiene rubber blends

Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers

Study on structures, dynamics and mechanical properties of styrene butadiene rubber (SBR)/silica interfaces: A fully atomistic molecular dynamics

Influence of the silanes on the crosslink density and crosslink structure of silica-filled solution styrene butadiene rubber compounds

EFFECT OF SILANE COUPLING AGENTS ON DYNAMIC RHEOLOGICAL PROPERTIES FOR UNVULCANIZED SSBR/SILICA COMPOUNDS

Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites

Hybrid Silica-Based Fillers in Nanocomposites: Influence of Isotropic/Isotropic and Isotropic/Anisotropic Fillers on Mechanical Properties of Styrene-Butadiene (SBR)-Based Rubber

Mesoporous Spherical Silica Filler Prepared from Coal Gasification Fine Slag for Styrene Butadiene Rubber Reinforcement and Promoting Vulcanization

The Mechanical and Viscoelastic Properties of SSBR Vulcanizates Filled with Organically Modified Montmorillonite and Silica

Silane pre-treated silica produced by ball milling and its reinforcing effects on an industrial rubber compound

Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites

An efficient method to prepare high grafting montmorillonite with silane coupling agent and its improvements for styrene butadiene rubber composites

Effect of Different Silane Coupling Agents In-Situ Modified Sepiolite on the Structure and Properties of Natural Rubber Composites Prepared by Latex Compounding Method