Abstract:Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of EPDM rubber composites. This study assesses the effectiveness of a specially developed surface‐modified carbon black, both on its own and in combination with nano‐silica, as a hybrid filler for ethylene–propylene–diene monomer (EPDM) rubber compounds. The modification process, which included treatment with a silane coupling agent, resulted in enhanced curing characteristics. The ∆Torque values for compounds incorporating the modified carbon black exceeded those of other formulations by 25.85%. Scanning electron microscopy (SEM) analysis demonstrated improved filler dispersion and better compatibility between rubber and filler due to the surface modification. The silane‐modified carbon black showed considerable enhancements in mechanical properties, particularly in tear resistance, with increases in tensile and tear strength of 22.46% and 34.86%, respectively, following surface treatment. Dynamic mechanical analysis (DMA) indicated the influence of both surface modification and filler type, revealing that the combination of modified carbon black and nano‐silica achieved a reduction in rolling resistance of 20.41% and enhanced ice and wet grip performance by 7.95%. Additionally, modified carbon black displayed varying effects on the glass transition temperature. Thermal gravimetric analysis (TGA) confirmed that the thermal stability of the compounds was consistent, while solvent resistance improved with surface modification, as shown by swelling ratios. Thermodynamic analysis indicated that the surface modification of carbon black positively influences the elasticity and chain mobility of the rubber compounds studied. In conclusion, the careful selection and optimization of filler materials and their modifications are essential for customizing the properties of rubber compounds to satisfy specific performance criteria and applications. Highlights Promising EPDM compounds were prepared with Silane‐Modified CB and Nano‐Silica. Silane‐modified CB effectively improved the curing properties of the EPDM compound. The ΔTorque and cross‐link density of modified CB/EPDM show the highest value. Modified CB/Nano‐Silica/EPDM exhibited significant improvement in tear strength. Modified CB/Nano‐silica/EPDM have lower rolling resistance and higher wet grip.

Effect of nano-silica surface-capped by bis[3-(triethoxysilyl)propyl] tetrasulfide on the cure behaviors, mechanical properties, swelling resistance and microstructure of styrene-butadiene rubber/acrylonitrile-butadiene rubber nanocomposites

The Effect of Nanosilica on Mechanical and Swelling Resistance Properties of Ternary Rubber (NR/SBR/NBR) Blends Nanocomposites with and without Bis(Triethoxysilylpropyl)Tetrasulfane

Influence of Modified Nanosilica on the Performance of NR/EPDM Blends: Cure Characteristics, Mechanical Properties and Swelling Resistance

Surface Modification of Silica by Two-Step Method and Properties of Solution Styrene Butadiene Rubber (SSBR) Nanocomposites Filled with Modified Silica

Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of natural rubber compounds

The Influence of in Situ Modification of Silica on Filler Network and Dynamic Mechanical Properties of Silica‐filled Solution Styrene–butadiene Rubber

Impact of In-Situ Functionalization of Carbon Nanotubes Using Bis(Triethoxysilylpropyl) Tetrasulfide on the Properties of EPDM/SBR–CNT Composites

Effects of Octamethylcyclotetrasiloxane Grafting and in Situ Silica Particle Generation on the Curing and Mechanical Properties of a Styrene Butadiene Rubber Composite

Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites

Preparation, Properties of In‐situ Silica Modified Styrene‐butadiene Rubber and Its Silica‐filled Composites

Effect of in situ silanization of multiwalled carbon nanotubes on the properties of NBR/MWCNT-OH composites

Effect of silica particle size and coating by natural latex on properties of styrene‐butadiene rubber/carbon black/silica composites

Surface modification of silica with N -cyclohexyl-2-benzothiazole sulfenamide for styrene–butadiene rubber composites with dramatically improved mechanical property

The effect of silane‐modified carbon black and nano‐silica, individually and in combination, on the performance of ethylene–propylene–diene monomer rubber

A facile and green preparation of nanosilica-supported antioxidant and its reinforcement and antioxidation effect on styrene-butadiene rubber

Reinforcement and Reinforcing Mechanism of Styrene–butadiene Rubber by Antioxidant-Modified Silica

Influence of the silanes on the crosslink density and crosslink structure of silica-filled solution styrene butadiene rubber compounds

Cure Characteristics and Mechanical Properties of NR/ SBR Blends Filled with Nano-sized CaCO<sub>3</sub>

Enhancing Mechanical Properties of Styrene–butadiene Rubber/silica Nanocomposites by in Situ Interfacial Modification with a Novel Rare-Earth Complex

Effect of silane coupling agent on the structure and mechanical properties of nano‐dispersed clay filled styrene butadiene rubber

The effect of modified carbon black and nano-silica, individually and in combination, on the curing, mechanical, and dynamical properties of butyl rubber (IIR)