Abstract:Synergistic effects of silane‐modified carbon black and nano‐silica hybrid fillers on the performance of EPDM rubber composites. This study assesses the effectiveness of a specially developed surface‐modified carbon black, both on its own and in combination with nano‐silica, as a hybrid filler for ethylene–propylene–diene monomer (EPDM) rubber compounds. The modification process, which included treatment with a silane coupling agent, resulted in enhanced curing characteristics. The ∆Torque values for compounds incorporating the modified carbon black exceeded those of other formulations by 25.85%. Scanning electron microscopy (SEM) analysis demonstrated improved filler dispersion and better compatibility between rubber and filler due to the surface modification. The silane‐modified carbon black showed considerable enhancements in mechanical properties, particularly in tear resistance, with increases in tensile and tear strength of 22.46% and 34.86%, respectively, following surface treatment. Dynamic mechanical analysis (DMA) indicated the influence of both surface modification and filler type, revealing that the combination of modified carbon black and nano‐silica achieved a reduction in rolling resistance of 20.41% and enhanced ice and wet grip performance by 7.95%. Additionally, modified carbon black displayed varying effects on the glass transition temperature. Thermal gravimetric analysis (TGA) confirmed that the thermal stability of the compounds was consistent, while solvent resistance improved with surface modification, as shown by swelling ratios. Thermodynamic analysis indicated that the surface modification of carbon black positively influences the elasticity and chain mobility of the rubber compounds studied. In conclusion, the careful selection and optimization of filler materials and their modifications are essential for customizing the properties of rubber compounds to satisfy specific performance criteria and applications. Highlights Promising EPDM compounds were prepared with Silane‐Modified CB and Nano‐Silica. Silane‐modified CB effectively improved the curing properties of the EPDM compound. The ΔTorque and cross‐link density of modified CB/EPDM show the highest value. Modified CB/Nano‐Silica/EPDM exhibited significant improvement in tear strength. Modified CB/Nano‐silica/EPDM have lower rolling resistance and higher wet grip.

Silane coupling agent 3‐aminopropyltriethoxysilane modified silica/epoxidized solution‐polymerized styrene butadiene rubber nanocomposites

Silica reinforced epoxidized solution-polymerized styrene butadiene rubber and epoxidized polybutadiene rubber nanocomposite as green tire tread

Behavior of epoxy resin filled with nano-SiO<sub>2</sub> treated with a Eugenol epoxy silane

Enhanced Compatibility and Thermo-Oxidative Stability of Silicone Rubber/Ethylene–Propylene Terpolymer Composites Via in Situ Interface Coupling

Epoxy modified styrene butadiene rubber (SBR) in green tire application

Functionalized Emulsion Styrene-Butadiene Rubber Containing Diethylaminoethyl Methacrylate for Silica Filled Compounds

Enhancing mechanical performance and wet‐skid resistance of emulsion styrene butadiene rubber/natural rubber latex composites via in‐situ hybridization of silanized graphene oxide and silica

Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites

Reactive grafting of hydroxyethyl acrylate in styrene butadiene rubber: Characterization and its effect on silica reinforced tire composites

The effect of silane‐modified carbon black and nano‐silica, individually and in combination, on the performance of ethylene–propylene–diene monomer rubber

Influence of the silanes on the crosslink density and crosslink structure of silica-filled solution styrene butadiene rubber compounds

Effect of silica particle size and coating by natural latex on properties of styrene‐butadiene rubber/carbon black/silica composites

Effect of nano-silica surface-capped by bis[3-(triethoxysilyl)propyl] tetrasulfide on the cure behaviors, mechanical properties, swelling resistance and microstructure of styrene-butadiene rubber/acrylonitrile-butadiene rubber nanocomposites

Silica Modified by Alcohol Polyoxyethylene Ether and Silane Coupling Agent Together to Achieve High Performance Rubber Composites Using the Latex Compounding Method

Novel experimental approach to evaluate silica–elastomer interactions of vulcanizates

Improving performance of natural rubber composites through the novel silica modified by a crosslinking agent

A novel VOC free bio-based coupling agent and its using strategy facing green tires with excellent dynamic performances

Designing a Coupling Agent with Aliphatic Polyether Chain and Exploring Its Effect on Silica/Natural Rubber Nanocomposites under the Action of Non-Rubber Contents

Improving the mechanical and abrasion properties of silica-reinforced styrene-butadiene rubber composites by optimizing the concentrations of compatibilizers

Surface modification of silica nanoparticles by a polyoxyethylene sorbitan and silane coupling agent to prepare high-performance rubber composites

Performance Enhancement of Silica Filled Natural Rubber Nanocomposites Using Organic Deep Eutectic Solvent