Abstract:This paper proposes and demonstrates an ultrasensitive refractive index (RI) sensor based on harmonic Vernier effect (HEV) and a cascaded Fabry-Perot interferometer (FPI). The sensor is fabricated by sandwiching a hollow-core fiber (HCF) segment between a lead-in single-mode fiber (SMF) pigtail and a reflection SMF segment with an offset of 37 µm between two fiber centers to form a cascaded FPI structure, where the HCF is the sensing FPI, and the reflection SMF is the reference FPI. To excite the HEV, the optical path of the reference FPI must be multiple times (>1) that of the sensing FPI. Several sensors have been made to conduct RI measurements of gas and liquid. The sensor's ultrahigh RI sensitivity of up to ∼378000 nm/RIU can be achieved by reducing the detuning ratio of the optical path and increasing the harmonic order. This paper also proved that the proposed sensor with a harmonic order of up to 12 can increase the fabricated tolerances while achieving high sensitivity. The large fabrication tolerances greatly increase the manufacturing repeatability, reduce production costs, and make it easier to achieve high sensitivity. In addition, the proposed RI sensor has advantages of ultrahigh sensitivity, compactness, low production cost (large fabrication tolerances), and capability to detect gas and liquid samples. This sensor has promising potentials for biochemical sensing, gas or liquid concentration sensing, and environmental monitoring.

All-Fiber Fabry–Perot Interferometer for Liquid Refractive Index Measurement

Optofluidic Refractive Index Sensor Based on Partial Reflection

Hybrid Fabry-Perot Interferometer for Simultaneous Liquid Refractive Index and Temperature Measurement

Refractive index measurement using photonic crystal fiber-based Fabry-Perot interferometer.

An Open-Cavity Fiber Fabry-Perot Interferometer Fabricated by Femtosecond Laser Micromachining for Refractive Index Sensing

Simultaneous Measurement For Liquid Level And Refractive Index Based On All-Fiber Modal Interferometer

Open-Cavity Fabry-Perot Interferometer Based on Etched Side-Hole Fiber for Microfluidic Sensing

Optical Refractive Index Sensor Based on Microfiber Fabry-Perot Interferometer

Miniaturized Fiber-Optic Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

Ultra compact and sensitive optical fiber interferometric refractive index sensor

Highly sensitive refractive index sensor with fiber in-line Fabry-Perot interferometers based on vernier effect

Refractive Index Measurement of Liquid Based on Open Fiber Fabry-Perot Interferometer

A Miniature Fiber-Optic Refractive-Index Sensor Based on Laser-Machined Fabry-Perot Interferometer Tip

Highly Sensitive Refractive Index Sensor Based on In-Fiber Optofluidic Fabry-Pérot Interferometer

In-line fiber-optic Fabry-Perot refractive-index tip sensors

All-Fiber Fabry-Perot Interferometer Gas Refractive Index Sensor Based on Hole-Assisted One-Core Fiber and Vernier Effect

Microfluidic Refractive Index Sensor Based on an All-Silica In-Line Fabry-Perot Interferometer Fabricated with Microstructured Fibers.

Optical Fiber Fabry-Perot Interferometer Cavity Fabricated by Femtosecond Laser-Induced Water Breakdown for Refractive Index Sensing.

Ultrasensitive Refractive Index Fiber Sensor Based on High-Order Harmonic Vernier Effect and a Cascaded FPI.

Temperature-insensitive Miniaturized Fiber Inline Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

All In-Fiber Fabry–Pérot Interferometer Sensor Towards Refractive Index and Temperature Simultaneous Sensing