Abstract:A method is described for the simultaneous voltammetric determination of the heavy metal ions cadmium(II), lead(II), mercury(II), zinc(II), and copper(II) using a glassy carbon electrode (GCE) modified with magnetite (Fe3O4) nanoparticles and fluorinated multiwalled carbon nanotubes (Fe3O4/F-MWCNTs). The Fe3O4/F-MWCNT composite was synthesized by a hydrothermal method and characterized by X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, elemental mapping, electrochemical impedance spectroscopy, and square wave stripping voltammetry. Under the optimum conditions, the electrode displays excellent response to the ions. Figures of merit for Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II), respectively, include (a) high electrochemical sensitivity (29.88, 43.50, 120.86, 47.34 and 90.31 (μA μM−1 cm−2), (b) well separated peaks (at −0.70, −0.53, +0.37, −1.11 and + 0.01 V vs. Ag/AgCl); (c) low limits of detection (0.014, 0.0084, 0.0039, 0.012, and 0.0053 μM); and (d) wide linear ranges (0.048–30.0, 0.028–30.0, 0.013–32.5, 0.039–32.5, and 0.017–31.5 μM). The modified GCE displays satisfying selectivity in the presence of potentially interfering other metal ions, stability for 30 days, and reproducibility of electrodes (with a relative standard deviation between 1.2 and 4.8% for n = 6). The modified GCE was applied to the determination of several heavy metal ions in (spiked) water and rice samples, and the results agreed well with data obtained by atomic fluorescence spectrometry or inductively coupled plasma-mass spectrometry. The dramatic performance probably result from the semi-ionic C-F bond on F-MWCNTs surface with a strong negative charge, the good electrical conductivity of the F-MWCNTs and Fe3O4, the synergistic interaction between Fe3O4 and F-MWCNTs, and the nafion conductive membrane improving the stability of the modified layer and enhanced cation adsorption.Graphical abstractAn environmentally-friendly, low-cost, high-throughput Fe3O4/fluorinated multi-walled carbon nanotube composite (Fe3O4/F-MWCNTs) modified glassy carbon electrode is described. It was applied to simultaneous electrochemical determination of Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II) by square wave stripping voltammetry

A Composite with Botryoidal Texture Prepared from Nitrogen-Doped Carbon Spheres and Carbon Nanotubes for Voltammetric Sensing of Copper(ii)

Poly(2-Amino-4-Thiazoleacetic Acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for the Electrochemical Detection of Copper(Ii)

Sensitive determination of copper (H) based on an ordered mesoporous carbon/nano-gold/L-cysteine modified electrode

Determination of Cu2+ Using Poly(2-aminothiazole)/Multi-Walled Carbon Nanotubes Composite Film Modified Glassy Carbon Electrodes

Highly Sensitive Simultaneous Determination of Cadmium (II), Lead (II), Copper (II), and Mercury (II) Ions on N-doped Graphene Modified Electrode

Electrochemical Determination of Copper in Aqueous Media at a Carbon Paste Electrode Modified with Natural-Based Nanocomposite and Carbon Nanotubes

Development of a new electrochemical method for the determination of copper(ii) at trace levels in environmental and food samples

A Novel Flexible Carbon Nanotube/silver Nanowire Electrode Toward Trace Cu(II) Detection in Water

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Adsorbent-Assisted In Situ Electrocatalysis: Highly Sensitive and Stable Electrochemical Sensor Based on AuNF/COF-SH/CNT Nanocomposites for the Determination of Trace Cu(II)

Design and Fabrication of Silver Nanoparticles Doped β-cyclodextrin-chitosan Functionalized Graphene Nanocomposite Modified Electrode for Determination of Cu(II)

Utilization of AuNPs Dotted S-doped Carbon Nanoflakes As Electrochemical Sensing Platform for Simultaneous Determination of Cu (II) and Hg (II)

Catalyst-free synthesis of phenolic-resin-based carbon nanospheres for simultaneous electrochemical detection of Cu (II) and Hg (II)

Sensitive and Selective Differential Pulse Voltammetry Detection of Cd(II) and Pb(II) Using Nitrogen-Doped Porous Carbon Nanofiber Film Electrode

Simultaneous voltammetric determination of cadmium(II), lead(II), mercury(II), zinc(II), and copper(II) using a glassy carbon electrode modified with magnetite (Fe3O4) nanoparticles and fluorinated multiwalled carbon nanotubes

Simultaneous Determination of Copper, Lead, and Cadmium Ions at A Mo6s9-Xix Nanowires Modified Glassy Carbon Electrode Using Differential Pulse Anodic Stripping Voltammetry

The fluorescent and colorimetric dual-response sensor based on carbon dots doped with nitrogen and sulfur for detecting copper ions

Electrochemical performance of a three-layer electrode based on Bi nanoparticles, multi-walled carbon nanotube composites for simultaneous Hg(II) and Cu(II) detection

An Electrochemical Sensor Based on a Porous Biochar/Cuprous Oxide (bc/cu2o) Composite for the Determination of Hg(II).

A New Chemically Modified Carbon Paste Electrode for Determination of Copper Based on N,N′-Disalicylidenehexameythylenediaminate Copper(II) Complex

Preparation of Poly-Dopamine Coated Graphite Carbon Nitride Voltammetric Sensor and Its Detection of Cu2+