Abstract:A method is described for the simultaneous voltammetric determination of the heavy metal ions cadmium(II), lead(II), mercury(II), zinc(II), and copper(II) using a glassy carbon electrode (GCE) modified with magnetite (Fe3O4) nanoparticles and fluorinated multiwalled carbon nanotubes (Fe3O4/F-MWCNTs). The Fe3O4/F-MWCNT composite was synthesized by a hydrothermal method and characterized by X-ray photoelectron spectroscopy, X-ray diffraction, transmission electron microscopy, scanning electron microscopy, elemental mapping, electrochemical impedance spectroscopy, and square wave stripping voltammetry. Under the optimum conditions, the electrode displays excellent response to the ions. Figures of merit for Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II), respectively, include (a) high electrochemical sensitivity (29.88, 43.50, 120.86, 47.34 and 90.31 (μA μM−1 cm−2), (b) well separated peaks (at −0.70, −0.53, +0.37, −1.11 and + 0.01 V vs. Ag/AgCl); (c) low limits of detection (0.014, 0.0084, 0.0039, 0.012, and 0.0053 μM); and (d) wide linear ranges (0.048–30.0, 0.028–30.0, 0.013–32.5, 0.039–32.5, and 0.017–31.5 μM). The modified GCE displays satisfying selectivity in the presence of potentially interfering other metal ions, stability for 30 days, and reproducibility of electrodes (with a relative standard deviation between 1.2 and 4.8% for n = 6). The modified GCE was applied to the determination of several heavy metal ions in (spiked) water and rice samples, and the results agreed well with data obtained by atomic fluorescence spectrometry or inductively coupled plasma-mass spectrometry. The dramatic performance probably result from the semi-ionic C-F bond on F-MWCNTs surface with a strong negative charge, the good electrical conductivity of the F-MWCNTs and Fe3O4, the synergistic interaction between Fe3O4 and F-MWCNTs, and the nafion conductive membrane improving the stability of the modified layer and enhanced cation adsorption.Graphical abstractAn environmentally-friendly, low-cost, high-throughput Fe3O4/fluorinated multi-walled carbon nanotube composite (Fe3O4/F-MWCNTs) modified glassy carbon electrode is described. It was applied to simultaneous electrochemical determination of Cd(II), Pb(II), Hg(II), Zn(II), and Cu(II) by square wave stripping voltammetry

Exploring the synchronized effect of MWCNT/X-manganate (X-Cu, Zn) nanocomposite for the sensitive and selective electrochemical detection of Hg(II) and Pb(II) in water

Non-conductive nanomaterial enhanced electrochemical response in stripping voltammetry: The use of nanostructured magnesium silicate hollow spheres for heavy metal ions detection

Simultaneous electrochemical sensing of heavy metal ions based on a g-C3N4/CNT/NH2-MIL-88(Fe) nanocomposite.

Application of gold nanoparticles/polyaniline-multi-walled carbon nanotubes modified screen-printed carbon electrode for electrochemical sensing of zinc, lead, and copper

Rapid detection of heavy metal ions based on a novel BMIMPF6-MWCNTs/GCE sensor and square wave voltammetry in actual water samples

A Novel Flexible Carbon Nanotube/silver Nanowire Electrode Toward Trace Cu(II) Detection in Water

Application of CeO2-MWCNTs nanocomposite for heavy metal ion detection in aqueous solutions by electrochemical technique

Ti3C2-MXene@N-doped carbon heterostructure-based electrochemical sensor for simultaneous detection of heavy metals

Catalyst-free synthesis of phenolic-resin-based carbon nanospheres for simultaneous electrochemical detection of Cu (II) and Hg (II)

Simultaneous voltammetric determination of cadmium(II), lead(II), mercury(II), zinc(II), and copper(II) using a glassy carbon electrode modified with magnetite (Fe3O4) nanoparticles and fluorinated multiwalled carbon nanotubes

Highly sensitive and highly selective lead ion electrochemical sensor based on Zn/Cu-BTC-NH 2 bimetallic MOFs with nano-reticulated reinforcing microstructure

Facile Fabrication of Zinc Phosphate-Based Nanocomposites for High-Performance Electrochemical Sensing of Hg(II)

Efficient ultra-trace electrochemical detection of Cd2+, Pb2+ and Hg2+ based on hierarchical porous S-doped C3N4 tube bundles/graphene nanosheets composite

COF/MWCNTs/CLS-Based Electrochemical Sensor for Simultaneous and Sensitive Detection of Multiple Heavy Metal Ions

The fabrication of TiO2/AgCNF/Nafion/GC electrodes for simultaneous electrochemical detection of Cd(II), Pb(II), Cu(II), and Hg(II) by optimizing the porosity of electrospun TiO2 nanofibers

Synthesis of CuZrO3 Nanocomposites/graphene and Their Application in Modified Electrodes for the Co-Detection of Trace Pb(II) and Cd(II)

Enhanced detection of heavy metal ions using Ag nanoparticles and single-walled carbon nanotubes within Cu-based metal-organic frameworks

Highly selective simultaneous electrochemical detection of trace level of heavy metals in water samples based on the single-crystalline Co3O4 nanocubes modified electrode

Electrochemical Sensing of Lead in Drinking Water Using MWCNTs and \b{eta}-Cyclodextrin

rGO/MWCNTs-COOH 3D hybrid network as a high-performance electrochemical sensing platform of screen-printed carbon electrodes with an ultra-wide detection range of Cd(II) and Pb(II)

Simultaneous Determination of Copper, Lead, and Cadmium Ions at A Mo6s9-Xix Nanowires Modified Glassy Carbon Electrode Using Differential Pulse Anodic Stripping Voltammetry