Application of CeO2-MWCNTs nanocomposite for heavy metal ion detection in aqueous solutions by electrochemical technique

Arti Mourya,Bidyut Mazumdar,Sudip K. Sinha

DOI: https://doi.org/10.1016/j.clema.2021.100021

2021-12-01

Cleaner Materials

Abstract:Heavy metals are most common pollutant found in the water bodies and are very toxic to the ecosystem. This work focuses on the application of cerium oxide and multiwall nanotube (CeO2-MWCNT) nanocomposites for simultaneous detection and quantification of heavy metal ions from aqueous solutions. The CeO2-MWCNTnanocomposite was prepared by hydrothermal method. The morphology, structural characterization and phase evolution studies of nanocomposites were determined by XRD, FE-SEM, XPS and TEM. The experimental results showed that the electrochemical performance of CeO2-MWCNT modified sensor for Hg2+, Pb2+, and Cu2+solutions, is promising and better than glassy carbon electrode. For quantification and calibration, differential pulse voltammetry technique was used for a broad concentration range of 5–5000 µM. The dependence of concentration of Hg2+, Pb2+, and Cu2+ions on the analytical signals can be fitted by quadratic polynomial equation. The modified sensor showed the lower detection limits of 1.98, 1.10 and 3.53 µg/l for Hg2+, Pb2+, and Cu2+,respectively. In addition, the CeO2-MWCNTbased sensor exhibited good sensitivity and high selectivity. The detection limit surpassed the lower limit defined by World Health Organization guidelines for Hg2+, Pb2+, and Cu2+. As a proof-of -concept, the suitability of the sensor was demonstrated in real water samples from tap water and river water. Correspondingly, this work demonstrated a simple and effective sensing platform for heavy metal ion detection.