Abstract:Sr(Ti0.3Fe0.7)O3- d (STF) materials with satisfactory stability and no rare-metal elements have attracted increasing research interest as oxygen electrodes of solid oxide electrochemical cells. However, STF-based electrodes are still limited by their modest catalytic activities at low temperatures. This can be improved by A-site deficiency of STF-based materials; however, data related to the influence of A-site deficiency of perovskite-oxide-based materials on sintering behavior and electrochemical performance are still lacking. Herein, porous electrodes with different Srx (Ti0.3Fe0.7)O3- d compositions (x = 0.85-1) were prepared. The effects of A-site cation deficiency ratios and sintering temperatures on the microstructures and electrochemical performance of the as-obtained STF electrodes were investigated. Electrochemical performance was improved for A-site deficient Srx (Ti0.3Fe0.7)O3-d. For Sr0.9(Ti0.3Fe0.7) 3- d electrode material sintered at 1050.C, the lowest polarization resistance measured at 700. C was similar to 0.14 O.cm2 but increased at higher x values. At sintering temperatures above 1050. C, the sintering diffusion occurred, where the electrolyte diffused through the deficient electrodes to form a dense layer at the electrode/electrolyte interface. On the other hand, although the presence of such diffused dense layer did not have significant effect on the electrochemical performance of the cells, it could be prevented by using lower sintering temperatures (=1000.C) to avoid possible negative effects on comprehensive performance. For the electrode obtained at x = 0.9 and sintered at 1000. C, the overall polarization resistance was recorded as 0.099 O.cm2 at 700. C. In sum, these findings look promising for future research.

Effect of B-site Deficiency on the (in, Fe) Co-Doped SrTiO 3

Study on the electrical conductivity of In-doped SrTiO3 with B-site deficiency prepared by sol-gel method

Evaluation of A-site deficient Sr1−xSc0.175Nb0.025Co0.8O3−δ (x=0, 0.02, 0.05 and 0.1) perovskite cathodes for intermediate-temperature solid oxide fuel cells

Synthesis and Electrical Properties of Co-doped Y0.08Sr0.92TiO3 − Δ As a Potential SOFC Anode

Effect of strontium ion doping on structural, thermal, morphological and electrical properties of a co-doped lanthanum manganite system

The Effect of B2o3-Li2co3 Addition on Sintering Behavior and Dielectric Properties of Ba0.6sr0.4tio3 Ceramics

Synthesis and Electrochemical Performance of Ni Substituted SrTi0.3Fe0.7O3-δ Cathode: Effect of A-Site Deficiency

Effect of Ti Doping on the Structure and Performance of LiNi0.75Co0.25O2

Sintering Behavior and Electrochemical Performance of A-site Deficient SrxTi0.3Fe0·7O3-δ Oxygen Electrodes for Solid Oxide Electrochemical Cells

Influence of A-site nonstoichiometry on sintering, microstructure and electrical properties of (Bi0.5Na0.5)TiO3 ceramics

A-site-deficiency range identified for in situ exsolution from (La0.4Sr0.6)1- αTi0.95Ni0.05O3± δ electrodes for SOFC and SOEC

Influence of A-Site Deficiency and Ca Concentration on the Electrical and Crystallographic Properties of (Nd0.2Sr0.7- x Ca x ) y Ti0.95Fe0.05O3-δ-Based Fuel Electrode for Solid Oxide Cells

Influence of crystal structure on the electrochemical performance of A-site-deficient Sr1−sNb0.1Co0.9O3−δ perovskite cathodes

Effect of Co doping on the electrochemical properties of Sr 2Fe1.5Mo0.5O6 electrode for solid oxide fuel cell

Evaluation of A-site Cation-Deficient (ba0.5sr0.5)1−xco0.8fe0.2o3−δ (x > 0) Perovskite As a Solid-Oxide Fuel Cell Cathode

A Novel Cathode Material of Iron-Doping Sm0.5sr0.5coo3 for Solid Oxide Fuel Cell

Effects of Niobium Doping on the Stability of SrCo0.2Fe0.8O3-δ Cathodes for Intermediate Temperature Solid Oxide Fuel Cells

Effect of B-site Doping on Sm0.5Sr0.5MxCo1−xO3−δ Properties for IT-SOFC Cathode Material (M = Fe, Mn)

Efficient Stabilization of Cubic Perovskite SrCoO3−δ by B-site Low Concentration Scandium Doping Combined with Sol–gel Synthesis

Effect of A-site Deficiency in BaCe0.8Sm0.2O3-δ on the Electrode Performance for Proton Conducting Solid Oxide Fuel Cells

Microstructure and electrical conductivity of A-site fully stoichiometric Na0.5+xBi0.5−xTiO3−δ with different Na/Bi ratios