Abstract:K4750 alloy is a new cast nickel-based superallos Abstrxcellent mechanical properties at 700-750 degrees C and is expected to replace K4169 alloy. However, the tensile plasticity of K4750 alloy n temperature fluctuates, and the relationship among room temperature tensile properties, solidification microstructure, and casting3 meters is still unclear for this alloy. In this work. Kwds K4750 alloy test bars were prepared with various casting temperatures and shell cooling conditions, and tested at room temperat Juniaxial tension. Sensitivity of the alloy's room temperature tensile properties to changes in casting temperature and shell cooling 13 as evaluated, and the mechanism was elucidated by microstructure characterization Results show that the grain size of alloy drops significantly with decreasing casting temperature, and the yield strength of the alloy slightly increases while the plasticity remains stable. When the cooling rate of the shell decreases, the fracture elongation of the alloy decreases significar room temperature. This is mainly because the cooling condition of mold shell significan Addrets the precipitation characteristic Auth c carbides. When the cooling rate is low, MC carbides tend to precipitate at grain bound n coarse and strip-like shapes. A13 ides are prone to internal cracks under stress, accelerating the intergranular failure of m13 and reducing the plasticity of alloy order to optimize the tensile properties of K4750 alloy at room temperature, more attention should be paid to the cooling rate of mold shell after casting and the precipitation morphology of intergranular carbides, prohibiting the formation of coarse intergranular carbides to improve the grain boundary plasticity of the alloy.

Microstructure and Mechanical Properties of Ni-based Superalloy K418 Produced by the Continuous Unidirectional Solidification Process

Precipitation Behavior of Nitride Inclusions in K418 Alloy under the Continuous Unidirectional Solidification Process

Effect of Cooling Rate on Microstructure, Microsegregation and Mechanical Properties of Cast Ni-based Superalloy K417G

Exceptional cryogenic tensile properties of K4169 superalloy by micro-grain casting process

Tensile, Creep Behavior and Microstructure Evolution of an As-Cast Ni-based K417G Polycrystalline Superalloy

Investigation of Solidification and Segregation Characteristics of Cast Ni-Base Superalloy K417G

Microstructure And Solidification Characteristics And Segregation Behavior Of Superalloy K4169

Solidification behavior and segregation characteristics of high W-content cast Ni-Based superalloy K416B

The Effects of Microstructure on the Thermophysical Properties of the K439B Ni-Based Superalloy

On Morphologies, Microsegregation, and Mechanical Behavior of Directionally Solidified Cobalt-Base Superalloy at Medium Cooling Rate

Effect of fine-grained structure on the mechanical properties of superalloys K3 and K4169

In-situ Observation of Solidification Process of GH4169 Superalloy at Different Cooling Rates

Hierarchical Architecture and Mechanical Behavior of K418 Ni-based Superalloys Manufactured by Laser Powder Bed Fusion

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Effects of Grain Refinement on the Microstructure and Tensile Behavior of K417G Superalloy

Effect of N Content on Microsegregation, Microstructure and Mechanical Property of Cast Ni-Base Superalloy K417g

Effect of carbon addition on microstructure and mechanical properties of a typical hard-to-deform Ni-base superalloy

Microstructure and Mechanical Properties of Graphene Reinforced K418 Superalloy by Selective Laser Melting

Effect of Pouring System on Microstructure and Properties of K4750 Alloy

Microstructural evolution and dynamic recrystallization mechanism of a heavily-alloyed Ni-based superalloy during hot extrusion

Microstructural Investigations of Ni-Based Superalloys by Directional Solidification Quenching Technique