Abstract:The remarkable efficiency of CIGS solar cells has been continuously broken in recent years due to the postdeposition treatment of heavy alkali elements (Alkali-PDT). At present, a large number of experiments have been carried out to study the influence of heavy Alkali-PDT in the electronic structure of the absorber surface. However, there are still some controversies. This paper takes CsF-PDT as an example to study the change in the electrical structure of the absorber surface. It can be found that the surface valence band of the absorber moves downward after CsF-PDT, which is consistent with the literature reports. However, for the position of the conduction band on the absorber surface after CsF-PDT, there are two situations. If the absorber surface has low Ga content (GGI < 0.5), a small amount of CsInSe2 can cause the conduction band edge of the absorber surface to exceed that of the No-PDT absorber surface after CsF-PDT. This may induce a carrier transportation barrier that deteriorates the device's performance. However, for the absorber surface with high Ga content (GGI >= 0.5), even lots of CsInSe2 do not easily induce the conduction band edge of the absorber surface to move upward, and the transportation barrier is unlikely to form. Meanwhile, for the absorber with a high surface Ga content, the shrinking of the valence band on the absorber surface after CsF-PDT can play a more important role in reducing the interfacial recombination. Therefore, the heavy Alkali-PDT should work better for the devices with a high Ga content on the absorber surface.

Mechanisms of Extrinsic Alkali Incorporation in CIGS Solar Cells on Flexible Polyimide Elucidated by Nanoscale and Quantitative Analyses

Surface Modification of Cu(in,Ga)Se2 Film with a Post‐Deposition Treatment Using a KI Solution and Its Effect on Solar Cell Performance

A simple and robust route toward flexible CIGS photovoltaic devices on polymer substrates: Atomic level microstructural analysis and local opto-electronic investigation

Effects of Alkali Elements on Copper Indium Gallium Aluminum Selenide Flexible Solar Cells Fabricated on Polyimide Substrates

Developments of High-Efficiency Flexible Cu(In,Ga)Se 2 Thin Film Solar Cells on a Polyimide Sheet by Sodium Incorporation

Influence of Alkali Element Post-Deposition Treatment on the Performance of the CIGS Solar Cells on Flexible Stainless Steel Substrates

Review on Alkali Element Doping in Cu(In,Ga)Se2 Thin Films and Solar Cells

The Role of Na Incorporation in the Low-Temperature Processed CIGS Thin Film Solar Cells Using Post Deposition Treatment

Alkali Incorporation into Cu(In,Ga)Se2 Determined by Crystal Orientation of Mo Back Contact: Implications for Highly Efficient Photovoltaic Devices

Flexible Cu(In, Ga)Se-2 Thin-Film Solar Cells on Polyimide Substrate by Low-Temperature Deposition Process

Passivation of Deep-Level Defects by Cesium Fluoride Post-Deposition Treatment for Improved Device Performance of Cu(In,Ga)Se2 Solar Cells.

High Efficiency Cu(In,Ga)Se_2 Thin-Film Solar Cells Doped Na on Polyimide Substrate

Atom-Scale Chemistry in Chalcopyrite-Based Photovoltaic Materials Visualized by Atom Probe Tomography.

Analysis of the Heavy Alkali Element Postdeposition Treatment: Which Factors Determine the Electronic Structure and Transport Properties of the Heterojunction in CIGS Thin Film Solar Cells

Reforming Material Chemistry of CIGS Solar Cells Via a Precise Ag Doping Strategy

Analysis of a novel method of alkalis treatment: Effect on energy band optimization and carrier recombination at the grain boundary

Interface Formation between CdS and Alkali Postdeposition-Treated Cu(In,Ga)Se2 Thin-Film Solar Cell Absorbers-Key To Understanding the Efficiency Gain

Impact of CsF Post-deposition Treatment on the Electronic Structure and Transport Properties of the Cu(In,Ga)Se2 Surface and Its Interface with CdS

Charge-carrier-concentration inhomogeneities in alkali-treated Cu(In,Ga)Se2 revealed by conductive atomic force microscopy tomography

Cu(In, Ga)Se 2 Thin Films on Flexible Polyimide Sheet: Structural and Electrical Properties Versus Composition

An Investigation on Performance Enhancement for KF Post Deposition Treated CIGS Solar Cells Fabricated by Sputtering CIGS Quaternary Targets