Abstract:Abstract The permanent implantation of stents with and without carrying drugs led to the unresolvable long-term complications such as restenosis and thrombosis. There are increasing interests in bioresorbable stents, which have the potential to resume the vessel tone and mitigate complications. The bioresorbable stent served as a temporary scaffold for an expected period of 6 to 12 months. The design of both polymeric material and stent structure is acknowledged to impact the mechanical integrity of bioresorbable stent. Poly-l-lactide (PLLA), a polymer-based material, is the most adopted bioresorbable stent materials due to its sufficient strength and degradation resistance. The mechanical performances of the PLLA stents need to be evaluated before it is considered to serve in the clinical application. Because of difficulty and time-consuming of physical tests, finite element method (FEM) has become an efficient way to solve the problem. However, the mechanical performances of PLLA stents during the degradation process could not be fully captured using the existing numerical models. A strain-based degradation numerical model with consideration of stent-artery interaction was proposed based on the previous published experimental data. In this model, the elongation fracture of the PLLA material was correlated to the degradation degree, a scalar factor controlled by the time and local strain. The degradation evolution process was then fully captured after the stent implantation using the derived material model. With continuously loss of mass in material, the degradation rates were not uniform in different locations along the stent structure. Severe degradation was observed at the higher strain regions of the stent, which locates at the outer surface of the stent, near the crowns of the ring stent strut. At first stage of degradation, the stent strut thinning was observed in the model which was also found in the previous experimental study. At second stage of degradation, the degradation happened at the connection region between the link strut and ring struts which resulted in the break of mechanical integrity. The diameter of the vessel has minor change during the first stage of the degradation process, while at the second stage, with the breakdown of the ring structure, the vessel recoiled to its original diameter in one month time. The two-staged degradation process showed a vision for the ideal stent design. The developed computational model provided more insights into the degradation process, which could complement the discrete experimental data for improving the design and clinical management of the bioresorbable vascular scaffold.

Lactic Acid-Mediated Endothelial to Mesenchymal Transition Through TGF-β1 Contributes to In-Stent Stenosis in Poly-L-lactic Acid Stent

Computational and Experimental Investigation into Mechanical Performances of Poly-L-Lactide Acid (PLLA) Coronary Stents

Failure signal of high orientation Poly(L-lactic acid) monofilament for self-expanding stent during lifetime: Disappeared amorphous connections

Cytocompatibility Evaluation of a Novel Series of PEG-Functionalized Lactide-Caprolactone Copolymer Biomaterials for Cardiovascular Applications

Strain-Based Degradation Model With Application to Poly-L-Lactide Acid (PLLA) Artery Stent

Design and characterization of PLLA stents with Z-structure

Enhanced Mechanical Properties and Anti–Inflammation of Poly(L–Lactic Acid) by Stereocomplexes of PLLA/PDLA and Surface–Modified Magnesium Hydroxide Nanoparticles

Improved Mechanical Properties of Poly( L ‐lactic Acid) Stent Coated by Poly( D , L ‐lactic Acid) and Poly( L ‐lactic‐co‐glycolic Acid) Biopolymer Blend

In vitro degradation and biocompatibility evaluation of fully biobased thermoplastic elastomers consisting of poly(β-myrcene) and poly( -lactide) as stent coating

Regulating mechanical performance of poly (l-lactide acid) stent by the combined effects of heat and aqueous media

A hazardous boundary of Poly(L-lactic acid) braided stent design: Limited elastic deformability of polymer materials

Evaluation of Bioresorbable Polymers As Potential Stent Materialin Vivo Degradation Behavior and Histocompatibility

Degradative polylactide nanofibers promote M2 macrophage polarization via STAT6 pathway in peritendinous adhesion

Exosome-Loaded Pro-efferocytic Vascular Stent with Lp-PLA2-Triggered Release for Preventing In-Stent Restenosis

A TEMPOL and rapamycin loaded nanofiber-covered stent favors endothelialization and mitigates neointimal hyperplasia and local inflammation

In Vitro Degradation of Poly[(L‐lactide)‐co‐(trimethylene Carbonate)] Copolymers and a Composite with Poly[(L‐lactide)‐co‐glycolide] Fibers As Cardiovascular Stent Material

In Silico Evaluation of In Vivo Degradation Kinetics of Poly(Lactic Acid) Vascular Stent Devices

Hybrid interpenetrating network of polyester coronary stent with tunable biodegradation and mechanical properties

Microstructure–property Relationship of L-Lactide/trimethylene Carbonate/glycolide Terpolymers As Cardiovascular Stent Material

In Vivo Study on the Histocompatibility and Degradation Behavior of Biodegradable Poly(Trimethylene Carbonate-Co-D,L-Lactide)

In vivo degradation behavior and histocompatibility of a novel fully biodegradable material:Poly trimethylene carbonate-Co-D,L-Lactide