Abstract:Ammonia is a zero-carbon candidate fuel for the decarbonization of internal combustion (IC) engines. A concern when using ammonia in IC engines is the increased emissions of nitrogen oxides (NOX), due to the additional nitrogen in the ammonia molecule. Compared to conventional petroleum such as gasoline and diesel, ammonia combustion adds the fuel NOX formation mechanism in addition to the original thermal NOX generation pathway, which further complicates the NOX emission characteristics of ammonia engines. Decoupling fuel NOX and thermal NOX helps to increase the understanding of the formation and evolutionary characteristics of nitrogen oxides occurring inside ammonia engines, but the available literature lacks studies in this respect. The purpose of this study is to fill this research gap and to propose a methodology for decoupling fuel NOX and thermal NOX. In brief, an artificial elemental nitrogen is applied to the Zeldovich mechanism and to the diatomic nitrogen in the combustion air, which allows the formation of NOX from the elemental nitrogen in the ammonia fuel to be separated from the NOX formed from the nitrogen in the air. A three dimensional (3D) computational fluid dynamics (CFD) model demonstrates the effectiveness of this approach and investigates the spatial and temporal distribution characteristics of thermal NOX and fuel NOX in the turbulent combustion field of ammonia engines. The in-cylinder activity analysis suggests that this separation of the NOX formation mechanism slightly alters the nitrogen-based chemistry, which is unavoidable. However, this approach still allows a reasonable characterization of the formation and evolution of fuel NOX and thermal NOX. The simulations show that fuel NOX is formed during ammonia oxidation because fuel NOX is an intermediate species, while thermal NOX has a high concentration in the burned zone because it is related to the temperature and the residence time of nitrogen at that temperature, both of which are expected and support the successful decoupling of fuel and atmospheric nitrogen. In addition, nitrous oxide (N2O) emissions come from the fuel NOX mechanism and are mainly distributed along the liner walls as it is formed by partial oxidation of ammonia released from the crevices during the late oxidation process. Moreover, the concentrations of both thermal and fuel-based nitrogen monoxide vary with the chemical equilibrium that changes with piston motion, and their concentrations are always comparable. As a result, combustion strategies for ammonia internal combustion engines needs to consider both thermal and fuel NOX reduction mechanisms, where the main difficulty is the N2O reduction. Catalytic combustion mode may be a viable strategy to improve the oxidation efficiency of the ammonia fuel trapped in the crevice and reduce N2O emissions in the cylinder.

Role of Absorber and Desorber Units and Operational Conditions for N-nitrosamine Formation During Amine-Based Carbon Capture

Influence of Dissolved Metals on N-Nitrosamine Formation under Amine-based CO2 Capture Conditions.

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Aerosol Emissions of Amine-Based CO<sub>2</sub> Absorption System: Effects of Condensation Nuclei and Operating Conditions

High amine emissions formation and aerosol particle size distribution in post-combustion CO2 capture process

Research Status of Amine Aerosol Formation and Emission in Amine Carbon Capture Process

Formation and Evolution of Thermal and Fuel Nitrogen Oxides in the Turbulent Combustion Field of Ammonia Internal Combustion Engines

Aerosol Emissions and Mitigation of Aqueous AMP/PZ Solvent for Postcombustion CO2 Capture

Health Risk Analysis of Nitrosamine Emissions from CO2 Capture with Monoethanolamine in Coal-Fired Power Plants

Insights into Aerosol Emission Control in the Postcombustion CO2 Capture Process: from Cluster Formation to Aerosol Growth.

Thermal Degradation of Monoethanolamine in CO 2 Capture with Acidic Impurities in Flue Gas

Computational Investigation of the Nitrosation Mechanism of Piperazine in CO2 Capture.

Analysis of Composite Sorbents for Ammonia Storage to Eliminate NOx Emission at Low Temperatures

Monoethanolamine (MEA) degradation rates in post-combustion CO2 capture plants with the capture of 100% of the added CO2

Study on Co2 Absorption by Aqueous Benzylamine and Its Formulations with Monoethanolamine As A Component for Post-Combustion Capture Process

Evaluation on water balance and amine emission in CO2 capture

Experimental Study and Rate-Based Modeling on Combined CO2 and SO2 Absorption Using Aqueous NH3 in Packed Column

Performance Simulations of Mea/Nh3 Based Large-Scale Co2 Capture in Packed Columns under Different Flue Gas Parameters

Experiment Research on Amine Thermal Degradation During CO_2 Capture

Harnessing Oxidized Amines as Robust Sorbents for Carbon Capture

Solvent-mediated modification of thermodynamics and kinetics of monoethanolamine regeneration reaction in amine-stripping carbon capture: Computational chemistry study