Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Experiment Research on Amine Thermal Degradation During CO_2 Capture

Experimental and computational study of the thermal degradation of primary amines used in CO 2 capture

Thermal Degradation Of Ethanolamine In Co2 Capture With So2

Thermal Degradation of Monoethanolamine in CO 2 Capture with Acidic Impurities in Flue Gas

Investigation of Thermal Stability and Continuous CO2 Capture from Flue Gases with Supported Amine Sorbent

Effect of acidic products from degradation of N-methyldiethanolamine amine on CO2/H2S capturing from natural gas

Thermal Stability of Various Amine CO2 Absorbents

So2 Effect on Monoethanolamine Oxidative Degradation in Co2 Capture Process

So2 Effect On Degradation Of Mea And Some Other Amines

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Oxidation of Supported Amines for CO2 Direct Air Capture: Assessing Impact on Physical Properties and Mobility via NMR Relaxometry

Experimental Investigation of Amine Regeneration for Carbon Capture through CO2 Mineralization

Study on CO2 Absorption and Regeneration Property of Flue Gas from Methyldiethanolamine-Amine Mixture System

Monoethanolamine (MEA) degradation rates in post-combustion CO2 capture plants with the capture of 100% of the added CO2

Study of MEA Degradation in the Solvent Degradation Rig

Catalytic CO2 Desorption Study of Tri-Solvent MEA-EAE-DEEA with Five Solid Acid Catalysts

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Heat requirement for regeneration of a CO_2 capture system using amine solutions

Investigation of Alkanol-Amine Solvents and their Blends for CO2 Removal from Natural Gas using Aspen-Hysys

Study on Corrosion in CO2 Chemical Absorption Process Using Amine Solution

Enhancements of monoethanolamine CO 2 absorption rate and degradation in the presence of nickel nanoparticles catalysts