Abstract:Residual emissions from post-combustion CO2 capture plants (PCC) must be reduced to zero or recaptured from the atmosphere to be compatible with long-term climate change goals. For amine-based CO2 capture, increasing CO2 capture fractions requires maintaining sufficient driving force of absorption at the top of the absorber column by reducing lean solvent loadings. To produce low lean loadings without excessively increasing the specific thermal energy input, increased operational pressures are required in the CO2 stripper, inevitably leading to higher temperatures, which may increase the specific thermal degradation rate of the solvent. Concurrently, for solvents that react rapidly with dissolved O2, increased residence time in the absorber due to the increased packing heights also associated with high capture fractions may increase the specific oxidative degradation rate as the direct contact with O2 in the flue gas is extended. Through process modelling and the application of a newly developed monoethanolamine (MEA) degradation framework, we investigate the effect on solvent degradation rates of increasing CO2 capture rates up to those that result in no net CO2 addition to the atmosphere. We do this for three key energy-producing processes: a combined cycle gas turbine, an energy-from-waste facility, and a steam methane reformer. In a first-of-a-kind study, we demonstrate that for a 35% wt. MEA-based solvent under steady-state conditions, solvent degradation is predicted to increase by 24% to 138% as a result of decreasing lean loadings and increased absorber residence time (process modifications that are thought to be beneficial when increasing CO2 capture fractions) from 53 - 208 gMEA/tCO2 when a 95% CO2 gross capture fraction is achieved to 125 – 257 gMEA/tCO2 when 99.2 - 99.8% is achieved (i.e. when 100% of the added CO2 is captured). Further analysis provides evidence that process modifications, such as intercooling of the absorber column and reduced stripper sump residence times, may be useful in reducing the rates of solvent degradation, providing critical insights to future test campaigns and project developments. However, limitations of this study remain; the degradation framework provides the instantaneous predicted MEA consumption rate of the system at a point in time and does not consider the catalytic effects that many impurities present in an operation plant will have on the reactions, potentially impacting degradation rates. Nonetheless, this serves as the first step towards understanding the effect of increasing CO2 capture fractions in post-combustion CO2 capture plants. Long-term tests with appropriate solvent management practices are required to fully quantify solvent degradation rates when operating at 100% added CO2 capture fractions.

Thermal Degradation Of Ethanolamine In Co2 Capture With So2

Thermal Degradation of Monoethanolamine in CO 2 Capture with Acidic Impurities in Flue Gas

So2 Effect On Degradation Of Mea And Some Other Amines

Monoethanolamine thermal-oxidative degradation in CO2 capture process and the effect of SO2

Experiment Research on Amine Thermal Degradation During CO_2 Capture

Study on CO2 Absorption-Mineralization Characteristics of Mixed Amine Solution Coupled with CaO and Key Influencing Factors in Mineralization Process

SO 2 effect on monoethanolamine oxidative degradation in CO 2 capture process

Monoethanolamine (MEA) degradation rates in post-combustion CO2 capture plants with the capture of 100% of the added CO2

Effect of acidic products from degradation of N-methyldiethanolamine amine on CO2/H2S capturing from natural gas

Experimental and computational study of the thermal degradation of primary amines used in CO 2 capture

Experimental study on the influence of SO2 on the CO2 capture process

Enhanced Tolerance to Flue Gas Contaminants on Carbon Dioxide Capture Using Amine-Functionalized Multiwalled Carbon Nanotubes

Effects of SO2 on CO2 capture using a hollow fiber membrane contactor

Enhancements of monoethanolamine CO 2 absorption rate and degradation in the presence of nickel nanoparticles catalysts

Investigation of Thermal Stability and Continuous CO2 Capture from Flue Gases with Supported Amine Sorbent

Effect of SO2 on the amine-based CO2 capture solvent and improvement using ion exchange resins

Aerosol Emissions of Amine-Based CO<sub>2</sub> Absorption System: Effects of Condensation Nuclei and Operating Conditions

Corrosion and degradation performance of novel absorbent for CO2 capture in pilot-scale

CO2 capture with the absorbent of a mixed ionic liquid and amine solution considering the effects of SO2 and O2

Degradation characteristics and utilization strategies of a covalent bonded resin-based solid amine during capturing CO 2 from flue gas

Experimental Study and Modified Modeling on Effect of SO2 on CO2 Absorption Using Amine Solution