Abstract:ConspectusCarbon dioxide (CO2) capture and storage (CCS) is a means to enable the continued use of fossil fuels in the short term. In particular, postcombustion CO2 capture has attracted considerable attention because it can be retrofitted into existing power plants and industrial plants. Among various CO2 capture technologies, the absorption of CO2 using aqueous amines has been industrially employed for decades. However, such amine scrubbing technologies have inherent limitations of environmental and health concerns due to volatile amine loss, corrosion, and high energy demands for regeneration. To overcome these limitations, CO2 adsorption using solid adsorbents has emerged as a promising alternative due to its noncorrosiveness and low energy demand. Various amine-containing adsorbents have been synthesized and investigated for postcombustion CO2 capture. These materials are prepared by physically impregnating low-vapor-pressure amine polymers or by chemically grafting amines onto nanoporous materials. A wide variety of amine guests and nanoporous hosts (e.g., SiO2, Al2O3, zeolites, MOFs, and polymers) have been combined to develop advanced CO2 adsorbents.The design of CO2 adsorbents is a multifaceted puzzle that must ultimately consider integration with large-scale CO2 capture processes. Various engineering aspects need to be carefully considered. Unfortunately, a significant proportion of previous studies has primarily focused on the use of novel materials for improving the CO2 adsorption capacity. In this Account, we describe key challenges and solutions to develop energy-efficient and stable amine-containing adsorbents for postcombustion CO2 capture via temperature swing adsorption (TSA). We found that a high CO2 working capacity, often overemphasized in the literature, does not necessarily guarantee a low energy demand for CO2 capture. Suppressing coadsorption of H2O during the CO2 adsorption in humid flue gas is also a significant factor. Amine-containing adsorbents can be degraded through various pathways, including hydrothermal degradation of nanoporous hosts and chemical degradation of amine guests via urea formation and oxidation. To inhibit such degradation pathways, it is extremely important to properly design the nanoporous structures of the hosts and the molecular structures of the amine guests. By combining macroporous silica hosts, poly(ethylenimine) (PEI) functionalized with various alkyl epoxides, and phosphate-based oxidative stabilizers, we could synthesize adsorbents exhibiting low energy demands for CO2 capture and unprecedentedly high thermochemical stability under TSA conditions. The macroporous silica host synthesized by assembling fumed silica particles via spray-drying exhibited high hydrothermal stability and enabled uniform distribution of bulky amine polymers within its pores. The functionalization of PEI with alkyl epoxides converted its primary amines into hindered secondary amines, leading to a significant reduction in energy demand for TSA cycles and a remarkable improvement in long-term stabilities. The oxidative stability of amines could be drastically improved by adding phosphate metal-binding reagents, which can poison ppm-level metal impurities that catalyze amine oxidation. The present discussions will provide important insights into designing practical adsorbents for CO2 capture from engineering perspectives.

Harnessing Oxidized Amines as Robust Sorbents for Carbon Capture

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Porosity and Hydrophilicity Modulated Quaternary Ammonium-Based Sorbents for CO2 Capture

Design of Amine-Containing Nanoporous Materials for Postcombustion CO2 Capture from Engineering Perspectives

Cost-effective carbon-based amine adsorbents for carbon capture: Equilibrium, kinetics and selectivity

Carbon Capture from Natural Gas Flue Emissions and Air via (Bi)Carbonate Formation in a Cyclodextrin-Based Metal-Organic Framework

Study on performance of alkanolamines as absorbents for CO2 capture

Feasibility of CO2 Capture from O2-Containing Flue Gas Using a Poly(ethylenimine)-Functionalized Sorbent: Oxidative Stability in Long-Term Operation

Research Progress of Aqueous Amine Solution for CO2 Capture: A Review

Sponges with covalently tethered amines for high-efficiency carbon capture

Enhanced SO2 resistance of tetraethylenepentammonium nitrate protic ionic liquid functionalized SBA-15 during CO2 capture from flue gas

Chemical absorption of carbon dioxide in non-aqueous systems using the amine 2-amino-2-methyl-1-propanol in dimethyl sulfoxide and N-methyl-2-pyrrolidone

Amine-impregnated Alumina Solid Sorbents for CO2 Capture. Lessons Learned

Efficient and stable CO2 capture using a scalable and spontaneous cross-linking amine-functionalized nano-Al2O3 adsorbent

Integrated Carbon Dioxide Capture and Conversion to Methanol Utilizing Tertiary Amines over a Heterogenous Cu/ZnO/Al2O3 Catalyst.

Post‐Synthetic Covalent Grafting of Amines to NH2‐MOF for Post‐Combustion Carbon Capture

Nonacid Carbon Materials as Catalysts for Monoethanolamine Energy-Efficient Regeneration

Carbon dioxide utilization with C–N bond formation: carbon dioxide capture and subsequent conversion

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas

Oxidation of Supported Amines for CO2 Direct Air Capture: Assessing Impact on Physical Properties and Mobility via NMR Relaxometry

Amine-Functionalized Quasi-MOF for Direct Air Capture of CO<sub>2</sub>