Abstract:In this study, the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy (HEA) were investigated by subjecting as-cast samples to cold rolling and annealing at different temperatures for 1 h. The as-cast and cold rolled HEAs show a single-phase face-centered cubic (FCC) structure. The annealing temperature has a noteworthy influence on the phase composition and microstructure of the cold rolled HEA, and the microstructural evolution is described as follows: heterogeneous microstructure with a FCC matrix and body-centered cubic (BCC) precipitates (750 ℃ and 850 ℃) → recrystallized microstructure with FCC matrix and BCC precipitates (950 ℃) → coarse grains with a single FCC phase (1050 ℃). Though the HEA annealed at 1050 ℃ has the best ductility and lowest coercivity, the yield strength is very low. A good combination of ductility and strength is found in the sample annealed at 850 ℃ (CR+HEA-850), whose microstructure is comprised of BCC precipitates, recrystallized FCC equiaxed grains and a few FCC hard-deformed lamellae. The heterogeneous structure of the CR+HEA-850 resulted in a strong back stress, which contributes to its good mechanical properties. The high yield strength came from the grain refinement, dislocation strengthening, Orowan effect, and twin boundaries. Additionally, its soft magnetic properties are also appealing, showing high saturated magnetization (112.4 emu/g) and good coercivity (8.7 Oe). Compared with the HEAs on other conditions in this study and those previously reported, the CR+HEA-850 displays an interesting combination of magnetic and mechanical performance, which offers a strategy towards a new generation of multifunctional high-entropy alloys.

Mechanical and magnetic properties of nonequiatomic Fe33Co28Ni28Ta5Al6 high entropy alloy by laser melting deposition

Magnetic and mechanical properties of nanotwin SiO 2 -FeCoNi(AlSi) 0.4 high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructure evolution and mechanical properties of Al CoCrFeNi high-entropy alloys by laser melting deposition

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting

Additive manufacturing of Al0.3CoCrFeNi high-entropy alloy by powder feeding laser melting deposition

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Effects of Laser Powers on Microstructures and Mechanical Properties of Al0.5FeCoCrNi High-Entropy Alloys Fabricated by Laser Melting Deposition

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

A Study of the Microstructure and Mechanical and Electrochemical Properties of CoCrFeNi High-Entropy Alloys Additive-Manufactured Using Laser Metal Deposition

Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0.5 high-entropy alloy

Electron beam melting of (FeCoNi)86Al7Ti7 high-entropy alloy

Alloying Behavior and Properties of FeSiBAlNiCox High Entropy Alloys Fabricated by Mechanical Alloying and Spark Plasma Sintering

Composition Design and Tensile Properties of Additive Manufactured Low Density Hf-Nb-Ta-Ti-Zr High Entropy Alloys Based on Atomic Simulations

Microstructure and tensile properties of duplex phase Al0.25FeMnNiCrCu0.5 high entropy alloy fabricated by laser melting deposition

Effect of Mn Content on Crystallization Behaviors and Magnetic Properties of FeCoNiBMn High-Entropy Amorphous Alloys

Origin of hard magnetism in Fe-Co-Ni-Al-Ti-Cu high-entropy alloy: Chemical shape anisotropy

Microstructure and mechanical properties of AlCoCrFeMnNi HEAs fabricated by selective laser melting

Study on a new high-entropy alloy Nd20Pr20La20Fe20Co10Al10 with hard magnetic properties

Fabrication of a strong and ductile FeCoCrNiMo0.3 high-entropy alloy with a micro-nano precipitate framework via laser powder bed fusion

High-strength Fe32Cr33Ni29Al3Ti3 fabricated by selective laser melting

In-situ synthesis of CoCrFeMnNi high-entropy alloy by selective laser melting