Abstract:Multi-component high-entropy alloys (HEAs) have recently attracted interest in balancing the bottleneck of high hardness and high fracture toughness. This study demonstrates the influence of Si addition to FeCoNiAl HEA fabricated by advanced powder metallurgy. The FeCoNiAlSi x (x = 0, 0.2, 0.4, 0.6, and 0.8 molar ratio) HEA was fabricated by mechanical alloying for 45 h and subsequent powder compact densification by spark plasma sintering (SPS). FeCoNiAlSi x HEA morphology and phase evolution were investigated to understand the influence of Si content on the microstructure, compressive strength, and fracture mechanisms of the FeCoNiAl alloy. The results indicate that FeCoNiAlSi x powders HEAs have single-phase body-centered cubic (BCC) structures. However, densification of powders HEAs facilitates dual-phase face-centered cubic (FCC) and BCC formation in FeCoNiAl, whereas the FCC phase transforms completely to BCC or BCC/B2 with Si addition. The Vickers microhardness of sintered FeCoNiAlSi x HEAs varies from 524 HV (for FeCoNiAl HEA) to 798 HV (for FeCoNiAlSi0.8 HEA). The maximum compressive strength of HEAs varies from 1325 MPa (for FeCoNiAl HEA) to 2031 MPa (for FeCoNiAlSi0.8 HEA), respectively. The absorption energies of FeCoNiAl and FeCoNiAlSi0.2 were 198 and 203 MJ/m3, respectively. In contrast, the absorption energies of FeCoNiAlSi0.6 and FeCoNiAlSi0.8 HEAs reduced drastically (115 and 96 MJ/m3, respectively). The failure mechanism of the FeCoNiAlSi x HEAs was a mixed ductile-brittle fracture in FeCoNiAl. Brittle fracture dominates in FeCoNiAlSi0.2 and FeCoNiAlSi0.4 HEAs. A complete brittle fracture was noticed with river-like patterns in FeCoNiAlSi0.8 HEAs. The results of this investigation suggest that HEAs with different Si molar ratios and tuned phase structures can be used to design high-strength structural alloys for automotive applications.

Magnetic and mechanical properties of nanotwin SiO 2 -FeCoNi(AlSi) 0.4 high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructural Evolution and Mechanical Properties of Al0.3CoCrFeNiSix. High-Entropy Alloys Containing Coherent Nanometer-Scaled Precipitates

Alloying Behavior and Properties of FeSiBAlNiCox High Entropy Alloys Fabricated by Mechanical Alloying and Spark Plasma Sintering

Effect of Si alloying on the structural, thermal expansion, and magnetic properties of FeCoNiAlSix high-entropy alloys

Microstructure, Mechanical Properties, and Damping Capacity of AlxCoCrFeNi High-Entropy Alloys Prepared by Spark Plasma Sintering

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Microstructure and Magnetic Behaviors of FeCoNi (al) Alloys with Incoherent Nanoprecipitates Prepared by High-pressure Solidification

Mechanical and magnetic properties of nonequiatomic Fe33Co28Ni28Ta5Al6 high entropy alloy by laser melting deposition

Fine tuning in-sync the mechanical and magnetic properties of FeCoNiAl0.25Mn0.25 high-entropy alloy through cold rolling and annealing treatment

The Si-doped BCC-based high-entropy alloy to overcome soft magnetic–mechanical properties trade-off via coherent B2 nanoprecipitates

A novel Fe-Co-Ni-Si high entropy alloy with high yield strength, saturated magnetization and Curie temperature

Microstructure and Mechanical Properties of FeCoNiCrAlx High-entropy Alloys by Selective Laser Melting

Origin of hard magnetism in Fe-Co-Ni-Al-Ti-Cu high-entropy alloy: Chemical shape anisotropy

Effect of Aluminum Addition on the Microstructure, Magnetic, and Mechanical Properties of FeCrCoNiMn High-Entropy Alloy

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

Microstructure and Magnetic Characteristics of AlCrCuFeNiTi High-Entropy Alloy Prepared by Mechanical Alloying Followed by Spark Plasma Sintering

Alloying behavior and characterization of (CoCrFeNiMn)90M10 (M=Al, Hf) high-entropy materials fabricated by mechanical alloying

Effect of Mn Content on Crystallization Behaviors and Magnetic Properties of FeCoNiBMn High-Entropy Amorphous Alloys

Exploring strengthening mechanism of FeCoNiAl high-entropy alloy by non-metallic silicon addition produced via powder metallurgy

Enhanced DC and AC Soft Magnetic Properties of Fe-Co-Ni-Al-Si High-Entropy Alloys via Texture and Iron Segregation

Mechanical properties and wear behaviors of FeCoNiCrMnTix high-entropy alloys manufactured by vacuum arc melting