Abstract:A new generation of cadmium zinc telluride (CZT) detectors has become available and is being evaluated by the International Atomic Energy Agency (IAEA) for safeguards verifications in the field. The new CZT detector, model M400, is a room temperature spectrometer manufactured by H3D, Inc. The M400 demonstrates superior energy resolution, effective isotope identification capabilities, and convenient usability features when tested in a controlled laboratory environment. These characteristics define the M400 as a potential platform for IAEA field detection applications, which could become suitable for nuclear material characterization (e.g., enrichment verification) and nuclear safeguards missions. The capabilities of gamma spectrometry codes including Fixed energy, Response function Analysis with Multiple efficiencies (FRAM) from Los Alamos National Laboratory, CZT for Uranium (CZTU) from Lawrence Livermore National Laboratory, and Gamma Detector Response and Analysis Software (GADRAS) from Sandia National Laboratories were adapted for M400 spectra, and the performance of the codes has been validated. This was reported in a prior work. To further validate the performance of the high-energy resolution CZT detector and the isotopic analysis codes, a field measurement campaign consisting of uranium hexafluoride (UF 6 ) cylinder measurements was conducted at a fuel fabrication facility. A total of 34 Type 30B cylinders containing UF 6 were measured using three different M400 CZT detectors. Each detector was outfitted with a custom rectangular collimator and shield made out T-Flex®, a tungsten-impregnated polymer. Measurements were performed at three different locations of the cylinder, ensuring that the measurement geometry satisfied the infinite thickness criterion. The spectra from the M400 CZT were analyzed using the code General Enrichment Meter (GEM). For analyzing the gamma-ray spectra from UF 6 cylinder, the GEM code is the appropriate tool since it relies only on the gamma-ray emissions from 235 U and not from other isotopes. Results from the spectral analysis were compared with the known abundance of 235 U in the cylinders, as well as with the International Target Values 2020 (ITV2020). The suitability of the different underlying techniques used by the various codes for UF 6 analysis is discussed. The challenges of measuring UF 6 contained in cylinders and mitigation strategies are highlighted.

An Approach to Measure the Enrichment of 235U by Enrichment Meter Principle Without Knowing the Thickness of Intervening Matter

Progress in AMS Measurement of U Isotope Ratios in Nanogram U Samples

AMS measurement of 53Mn and its initial application at CIAE

Determination of Cross Sections for The238u(n,3n)

Research on Detection Technology of 235U Enrichment and Loading Uniformity for Nuclear Fuel Rods

Measurement and Analysis of Fission Rates in a Spherical Mockup of Uranium and Polyethylene

Co-precipitation approach to measure amount of $^{238}$U in copper to sub-ppt level using ICP-MS

Uranium Measurements in the Field Using High-Resolution Cadmium Zinc Telluride Detectors

Enrichment measurement by passive γ-ray spectrometry of uranium dioxide fuel pellets using a europium-doped, strontium iodide scintillator

Verification of uranium composite materials using active interrogation techniques for safeguards purposes

A practical approach of measuring $^{238}$U and $^{232}$Th in liquid scintillator to sub-ppq level using ICP-MS

System Optimization Study of Hybrid K-edge/XRF Densitometer for Uranium-Plutonium Solution Measurement

Compact and transportable system for detecting lead-shielded highly enriched uranium using 252Cf rotation method with a water Cherenkov neutron detector

Sensitive 236 U/ 238 U Isotopic Analysis of Trace Uranium in Safeguards Environmental Samples Using Multicollector Inductively Coupled Plasma Mass Spectrometry

Trace impurity analysis in uranium materials by rapid separation and ICP-MS/MS measurement with matrix matched external calibration

Measuring Very Low Radiation Doses in PTFE for Nuclear Forensic Enrichment Reconstruction

Measurement of the <SUP>236,238</SUP>U(n,f) cross sections from the threshold to 200 MeV at CSNS Back-n

An approach for collaboratively separation and detection of uranium based on novel plastic scintillating resin

New technology for transmission measurements in process pipes

Modeling Detector Response Curves for a High-Fidelity Uranium Measurement for use in Simulations

Measurement of the U-236,U-238(n,f) cross sections from the threshold to 200 MeV at CSNS Back-n