Abstract:A new generation of cadmium zinc telluride (CZT) detectors has become available and is being evaluated by the International Atomic Energy Agency (IAEA) for safeguards verifications in the field. The new CZT detector, model M400, is a room temperature spectrometer manufactured by H3D, Inc. The M400 demonstrates superior energy resolution, effective isotope identification capabilities, and convenient usability features when tested in a controlled laboratory environment. These characteristics define the M400 as a potential platform for IAEA field detection applications, which could become suitable for nuclear material characterization (e.g., enrichment verification) and nuclear safeguards missions. The capabilities of gamma spectrometry codes including Fixed energy, Response function Analysis with Multiple efficiencies (FRAM) from Los Alamos National Laboratory, CZT for Uranium (CZTU) from Lawrence Livermore National Laboratory, and Gamma Detector Response and Analysis Software (GADRAS) from Sandia National Laboratories were adapted for M400 spectra, and the performance of the codes has been validated. This was reported in a prior work. To further validate the performance of the high-energy resolution CZT detector and the isotopic analysis codes, a field measurement campaign consisting of uranium hexafluoride (UF 6 ) cylinder measurements was conducted at a fuel fabrication facility. A total of 34 Type 30B cylinders containing UF 6 were measured using three different M400 CZT detectors. Each detector was outfitted with a custom rectangular collimator and shield made out T-Flex®, a tungsten-impregnated polymer. Measurements were performed at three different locations of the cylinder, ensuring that the measurement geometry satisfied the infinite thickness criterion. The spectra from the M400 CZT were analyzed using the code General Enrichment Meter (GEM). For analyzing the gamma-ray spectra from UF 6 cylinder, the GEM code is the appropriate tool since it relies only on the gamma-ray emissions from 235 U and not from other isotopes. Results from the spectral analysis were compared with the known abundance of 235 U in the cylinders, as well as with the International Target Values 2020 (ITV2020). The suitability of the different underlying techniques used by the various codes for UF 6 analysis is discussed. The challenges of measuring UF 6 contained in cylinders and mitigation strategies are highlighted.

Research on Detection Technology of 235U Enrichment and Loading Uniformity for Nuclear Fuel Rods

An Approach to Measure the Enrichment of 235U by Enrichment Meter Principle Without Knowing the Thickness of Intervening Matter

Progress in AMS Measurement of U Isotope Ratios in Nanogram U Samples

Compact and transportable system for detecting lead-shielded highly enriched uranium using 252Cf rotation method with a water Cherenkov neutron detector

Enrichment measurement by passive γ-ray spectrometry of uranium dioxide fuel pellets using a europium-doped, strontium iodide scintillator

Design and validation of a gamma-ray scanning system for measuring irradiated nuclear fuel

Uranium Measurements in the Field Using High-Resolution Cadmium Zinc Telluride Detectors

Verification of uranium composite materials using active interrogation techniques for safeguards purposes

Measurement and Analysis of Fission Rates in a Spherical Mockup of Uranium and Polyethylene

Research on Intelligent Detection Technology of Surface Defects of Nuclear Fuel Rods Based on Machine Vision

Solidification-induced nonuniformity in U–Zr–RE metallic nuclear fuel rods

Design of Residues Measurement Device of Uranium

Gamma and neutron detector performance in a MOX fuel fabrication plant environment

U-Si and U-Si-Ai Dispersion Fuel Alloy Development for Research and Test Reactors

An Advanced Uranium Ore Grade Estimation Method Based on Photofission Driven by an E-Linac

System Optimization Study of Hybrid K-edge/XRF Densitometer for Uranium-Plutonium Solution Measurement

Study on In-Service Inspection of Nuclear Fuel Assembly Failure Using Ultrasonic Plate Wave

Study on fuel management strategy for accident-tolerant fuel on in-pile irradiation test

Design of Mini-Plate-1 Irradiation Test for Qualification of High-Density, Low-Enriched U-10Mo Monolithic Fuel

Trace impurity analysis in uranium materials by rapid separation and ICP-MS/MS measurement with matrix matched external calibration

Dual-Enhancement Electrochemiluminescence Device for Ultratrace Uranium Visualized Monitoring in Fish, Hair, and Nail Samples