Abstract:A new generation of cadmium zinc telluride (CZT) detectors has become available and is being evaluated by the International Atomic Energy Agency (IAEA) for safeguards verifications in the field. The new CZT detector, model M400, is a room temperature spectrometer manufactured by H3D, Inc. The M400 demonstrates superior energy resolution, effective isotope identification capabilities, and convenient usability features when tested in a controlled laboratory environment. These characteristics define the M400 as a potential platform for IAEA field detection applications, which could become suitable for nuclear material characterization (e.g., enrichment verification) and nuclear safeguards missions. The capabilities of gamma spectrometry codes including Fixed energy, Response function Analysis with Multiple efficiencies (FRAM) from Los Alamos National Laboratory, CZT for Uranium (CZTU) from Lawrence Livermore National Laboratory, and Gamma Detector Response and Analysis Software (GADRAS) from Sandia National Laboratories were adapted for M400 spectra, and the performance of the codes has been validated. This was reported in a prior work. To further validate the performance of the high-energy resolution CZT detector and the isotopic analysis codes, a field measurement campaign consisting of uranium hexafluoride (UF 6 ) cylinder measurements was conducted at a fuel fabrication facility. A total of 34 Type 30B cylinders containing UF 6 were measured using three different M400 CZT detectors. Each detector was outfitted with a custom rectangular collimator and shield made out T-Flex®, a tungsten-impregnated polymer. Measurements were performed at three different locations of the cylinder, ensuring that the measurement geometry satisfied the infinite thickness criterion. The spectra from the M400 CZT were analyzed using the code General Enrichment Meter (GEM). For analyzing the gamma-ray spectra from UF 6 cylinder, the GEM code is the appropriate tool since it relies only on the gamma-ray emissions from 235 U and not from other isotopes. Results from the spectral analysis were compared with the known abundance of 235 U in the cylinders, as well as with the International Target Values 2020 (ITV2020). The suitability of the different underlying techniques used by the various codes for UF 6 analysis is discussed. The challenges of measuring UF 6 contained in cylinders and mitigation strategies are highlighted.

Modeling Detector Response Curves for a High-Fidelity Uranium Measurement for use in Simulations

An Adaptive Finite-Element Model For The Behavior Of Uranium Hexafluoride Filled Container In A Fire

Uranium Measurements in the Field Using High-Resolution Cadmium Zinc Telluride Detectors

Monitoring for Actinide Neutron Emissions From Spent Nuclear Fuel Under Extreme Gamma Fields Using Centrifugally Tensioned Metastable Fluid Detector Sensor Technology

Verification of uranium composite materials using active interrogation techniques for safeguards purposes

Comparing DGSMC, FIER, and FISPACT Simulations to Experimental Delayed Gamma-Ray Spectra for Nuclear Safeguards Development

A Reactive Molecular Dynamics Model for Uranium/Hydrogen Containing Systems

Design and validation of a gamma-ray scanning system for measuring irradiated nuclear fuel

Simulating gas-filled neutron detector responses with DRiFT

Measurement and Analysis of Fission Rates in a Spherical Mockup of Uranium and Polyethylene

High-pressure 4he Drift Tubes for Fissile Material Detection

An Approach to Measure the Enrichment of 235U by Enrichment Meter Principle Without Knowing the Thickness of Intervening Matter

Modelling the Response of CLLBC(Ce) and TLYC(Ce) SiPM-Based Radiation Detectors in Mixed Radiation Fields with Geant4

Neutron detectors for active interrogation of highly enriched uranium

Experiments and Monte Carlo modeling of a higher resolution Cadmium Zinc Telluride detector for safeguards applications

System Optimization Study of Hybrid K-edge/XRF Densitometer for Uranium-Plutonium Solution Measurement

Comparing Sensor Fusion and Multimodal Chemometric Models for Monitoring U(VI) in Complex Environments Representative of Irradiated Nuclear Fuel

Iodine and Fission Gas Release Rates from HTR Fuel – Experiments, Correlations, and Mathematical Models

Calculation and Characteristic Analysis of Ex-Core Detector Spatial Response Function for High Temperature Gas-Cooled Reactor

Simulation of the response of a segmented high-purity germanium detector for gamma emission tomography of nuclear fuel