Abstract:Synthesis of porous titania via mechanical activation of natural ilmenite and subsequent simultaneous dissolution and hydrolysis in dilute solutions of sulfuric acid was investigated by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), N2 adsorption/desorption measurements, energy-dispersive X-ray spectrometry (EDX) and thermogravimetric analysis (TG). This is a novel template-free approach for synthesis of microporous, mesoporous and micro–mesoporous TiO2 materials. Effects of sulfuric acid concentration and calcination temperature on physicochemical properties of the TiO2 materials were examined systematically. The results show that both the factors considerably affected the porosity of the materials. In a 15% acid solution a microporous TiO2 hydrolysate with BET surface area 109.3m2/g was prepared. With a 10% H2SO4, we obtained a more pure micro/mesopore TiO2 hydrolysate with BET area of 257.6m2/g. Calcining the hydrolysate at ⩾500°C led to the formation of a mesopore TiO2. The mesoporous TiO2 generated at 600°C still has a BET area of 92.1m2/g. The high thermal stability is probably related to the presence of H2SO4 in the channel walls of hydrolysate. The XRD analysis indicated all the TiO2 materials prepared in this study being rutile. The mechanism for formation of the porous rutile TiO2 is mainly via in situ hydrolysis and precipitation of the dissolved titanium on the un-reacted ilmenite surface, where H2SO4 may play a very important role.

TiO2/SiO2 Membrane Materials Via a Sol–gel Process: Preparation and Characterization Calcined under N2 Atmosphere

Preparation of Nanometer Tio2/Sio2 Composite Materials by Adsorption Phase Nanoreactor Technique

Preparation of TiO2 nanoparticles on the surface of SiO2 in binary liquids

PREPARATION OF NANO TiO2 ON SURFACE OF SILICA

Supported mesoporous SiO2 membrane synthesized by sol–gel-template technology

Al2O3–SiO2–TiO2 Composite Ceramic Membranes from Sol–gel Processing

Preparation of Macroporous and Mesoporous Tio2 Film with Various Solvents

Preparation of TiO2/SiO2 Composite by Chemical Coating Method

Preparation and Properties of Nanostructure Anatase Tio2 Monoliths Using 1-Butyl-3-methylimidazolium Tetrafluoroborate Room-Temperature Ionic Liquids As Template Solvents

Carbon-Doped TiO2 Nanofiltration Membranes Prepared by Interfacial Reaction of Glycerol with TiCl4 Vapor

The influence of calcination on the microstructure of mesoporous TiO 2 films by sol-gel

Sol–gel Synthesis of Macroporous TiO 2 from Ionic Precursors Via Phase Separation Route

Sol-Gel Hydrothermal Synthesis and Pore-Structure Characterization of the High Ti/Si Silicotitanium Molecular Sieve

Preparation of porous rutile titania from ilmenite by mechanical activation and subsequent sulfuric acid leaching

Electrochemically produced nano-TiO2-coated SiC membranes for photocatalytic water treatment: Preparation, characterization, and hydroxyl radical formation

Fundamental Studies of a New Hybrid (inorganic–organic) Positively Charged Membrane. II. Membrane Preparation Via Alcoholysis Reaction and Amination Processes of Silicone and Titanate Coupling Agents

Investigation of Mesoporous and Microporous Nanocrystalline Silicon-Doped Titania

Preparation and Gas Separation of Amorphous Silicon Oxycarbide Membrane Supported on Silicon Nitride Membrane

Preparation of nano-TiO2 composite membrane and its application in fuel cell

Soft-templated mesostructured TiO2 - SiO2 composites with high thermal stability

Impact of SiO2 Modification on the Performance of Nafion Composite Membrane