Abstract:The development of electrode materials with the synergistic effects of good chemical stability and high electrical conductivity has improved the sluggish ion kinetics and severe capacity degradation of rechargeable lithium batteries. Herein, a multifunctional heterostructure material (MoS3-Ti3C2Tx) comprising a functionalized MXene (Ti3C2Tx) and amorphous MoS3 is prepared by a scalable electrostatic self-assembly method. Remarkably, as lithium-ion battery anodes, the resultant MoS3-Ti3C2Tx not only exhibits increased electrochemical activity, accelerated lithium-ion diffusion and fast charge transfer kinetics but also shows high specific capacity, excellent rate performance and long-term cycling stability. By virtue of these merits, MoS3-Ti3C2Tx offers an excellent reversible capacity of 1043 mAh g−1 at 200 mA g−1 and exhibited a capacity of 568 mAh g−1 at a current density of 2 A g−1 after 1000 cycles. When acting as the cathode for lithium-sulfur batteries, the amorphous MoS3 anchored on MXene demonstrates high capture and catalytic activity towards polysulfide conversion. Accordingly, the optimized electrode exhibits a capacity of 836 mAh g−1 at 0.2C after 100 cycles and a satisfactory rate performance of 463 mAh g−1 at 2C after 400 cycles. Moreover, the associated conversion mechanism is studied by ex situ XPS. These results demonstrate that heterostructure composites constructed by an amorphous sulfide and surface functionalized MXene are feasible electrode materials for both lithium-sulfur batteries and lithium-ion batteries.

Unraveling The Formation Of Amorphous Mos2 Nanograins During The Electrochemical Delithiation Process

Two-phase electrochemical lithiation in amorphous silicon

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Lithium Storage Mechanisms and Electrochemical Behavior of a Molybdenum Disulfide Nanoparticle Anode

Enhancing the specific capacity and rate performance of MoS<sub>2</sub> nanomaterials <i>via</i> introducing subgrains at a hydrothermal temperature 160 C

Unraveling Structure Evolution Failure Mechanism in MoS2 Anode for Improving Lithium Storage Stability

Atomic Mechanism Of Dynamic Electrochemical Lithiation Processes Of Mos2 Nanosheets

Electrochemical Reaction Mechanism of the MoS2 Electrode in a Lithium-Ion Cell Revealed by in Situ and Operando X-ray Absorption Spectroscopy.

Ethylene glycol solvent induced expansion of interplanar spacing and 2H-1T phase transformation of molybdenum disulfide nanocomposites for enhanced lithium storage capability

New Insights into Electrochemical Lithiation/Delithiation Mechanism of Α-Moo3 Nanobelt by in Situ Transmission Electron Microscopy

Amorphous MoS3 decoration on 2D functionalized MXene as a bifunctional electrode for stable and robust lithium storage

Atomic Structure and Migration Dynamics of MoS2/LixMoS2 Interface

Dynamic Phase Evolution of MoS3 Accompanied by Organodiselenide Mediation Enables Enhanced Performance Rechargeable Lithium Battery

Direct evidence of an unanticipated crystalline phase responsible for the high performance of few-layered-MoS2 anodes for Na-ion batteries

Unraveling the Improved Lithium-Storage Mechanism by Interfacial Engineering Based on Metallic MoS2/MoN Heterostructure

Crystalline molybdenum carbide−amorphous molybdenum oxide heterostructures: In situ surface reconfiguration and electronic states modulation for Li−S batteries

Unlocking the potential of SnS 2 : Transition metal catalyzed utilization of reversible conversion and alloying reactions

Anisotropic Lithium-Ion Migration and Electro-Chemo-mechanical Coupling in Sb2Se3 Single Crystals

Probing Microstructure and Phase Evolution of Α-Moo3 Nanobelts for Sodium-Ion Batteries by in Situ Transmission Electron Microscopy

Sulfur Refines Moo2 Distribution Enabling Improved Lithium Ion Battery Performance

Lithiation and Delithiation Processes in Lithium–Sulfur Batteries from Ab Initio Molecular Dynamics Simulations