Abstract:Purpose This paper aims to develop a model that reflects the current transformer (CT) core materials nonlinearity. The model enables simulation and analysis of the CT excitation current that includes the inductive magnetizing current and the resistive excitation current. Design/methodology/approach A nonlinear CT model is established with the magnetizing current as the solution variable. This model presents the form of a nonlinear differential equation and can be solved discretely using the Runge–Kutta method. Findings By simulating variations in the excitation current for different primary currents, loads and core materials, the results demonstrate that enhancing the permeability of the B–H curve leads to a more significant improvement in the CT ratio error at low primary currents. Originality/value The proposed model has three obvious advantages over the previous models with the secondary current as the solution variable: (1) The differential equation is simpler and easier to solve. Previous models contain the time differential terms of the secondary current and excitation flux or the integral term of the flux, making the iterative solution complicated. The proposed model only contains the time differential of the magnetizing current. (2) The accuracy of the excitation current obtained by the proposed model is higher. Previous models calculate the excitation current by subtracting the secondary current from the converted primary current. Because these two currents are much greater than the excitation current, the error of calculating the small excitation current by subtracting two large numbers is greatly enlarged. (3) The proposed model can calculate the distorted waveform of the excitation current and error for any form of time-domain primary current, while previous models can only obtain the effective value.

Research on nonlinear correction system of current transformer

Current Transformer Saturation Compensation Based on a Partial Nonlinear Model

Flexible Neural Network-based Compensation Method for Saturation Characteristic of Current Transformer in Power System

Research on the Practicality of Current Transformer Saturation Detection Using the Magnetic Restraint Principle

A Simple Method for Compensating Harmonic Distortion in Current Transformers: Experimental Validation

A Novel Method for Current Transformer Saturation Countermeasure Based on Comparing Two Currents' Polarities

Comparison of Mathematical Methods for Compensating a Current Signal under Current Transformers Saturation Conditions

Modeling and Simulation Analysis of Current Transformer Based on Magnetizing Current As the Solution Variable

Detection Method for Current Transformer Saturation Based on the Dropping of the Secondary Current

Design of double-loop current transformer based on magnetic field incomplete cancellation

A High-Precision Error Calibration Technique for Current Transformers under the Influence of DC Bias

Error Compensation System for Optical Current Transformer Based on Wavelet Analysis and Neural Network

A New Approach to Current Transformer Saturation Compensation for Transmission Line Differential Protection

A Hybrid Model-Driven and Data-Driven Approach for Saturation Correction of Current Transformer

Compensation of Saturation in Current Transformer Using Modified Prony Method

Research on the Methods of Measuring High Frequency Small Current in Large Power Frequency Current by Current Transformer

New Method of Detection of Current Transformer Saturation

Approach of Obtaining the Error of Current Transformers Through the Measurement of Turns Correction Factor and Impedance

Real-Time Detection Method for Saturation Speed of Air-Core Coil Current Transformer

An Assistant Criterion for Distinguishing Current Transformer Saturation Based on the Load Current Detection

Integration of a Protection/Measurement Current Transformer Based on Compensation Algorithm