Abstract:It is necessary to determine the mass properties of an on-orbit large-scale flexible spacecraft in order to achieve high-precision attitude control. The mass properties of the spacecraft include the inertia, the center of mass, and the mass. Research in this area had been mostly focused on rigid spacecrafts. The coupling between the rigid body of the spacecraft and the large flexible appendages on it, however, could have significant effect on the mass properties determination. This article proposes a momentum conservation–based determination method that takes into consideration the rigid–flexible coupling factors of large-scale flexible spacecrafts. First, a control method is designed to ensure that the spacecraft stays motionless after the motivation incurred for mass properties determination. Second, an inertia matrix determination method is developed using a Kalman filter, in which the coupling factors are added in the amendment procedure. Third, the Kalman filter with input is applied in the determination of the center of mass: on the one hand, this method can use one the accelerometer placed at the flexible appendages, if the deformation can be measured; on the other side, the method can use three accelerometers placed at three orthogonal points of the rigid part of the spacecraft, when the deformation cannot be measured. Finally, the mass can be gained by estimating the center of mass twice. Simulations were carried out on a large-scale rigid–flexible coupling spacecraft. The results demonstrated that the determination errors in all cases are less than 10%, which meet the engineering requirements.

A Flexible Measurement Technique for Testing the Mass and Center of Gravity of Large-Sized Objects

A Structure for Accurately Determining the Mass and Center of Gravity of Rigid Bodies

Novel Measurement Method for Determining Mass Characteristics of Pico-Satellites

Mass and Center of gravity measurement of large size revolving bodies and error separation method

Design of mass property integration measurement system for large size non-rotating bodies

Flexible Measurement of Large Scale Column Structure's Centroid Based on Coordinate Measurement Equipment

General Mass Property Measurement Equipment for Large-Sized Aircraft

Research on the Pose Error Compensation Technology for the Mass and Centroid Measurement of Large-Sized Aircraft Based on Kinematics

Research on a New Type of Center of Mass Measuring Instruments

Center-of-mass Experiment System for Heavy and Special Vehicle

A Combined Measurement Method for Large-Size Aerospace Components

Large-scale flexible spacecraft mass properties determination using torque-generating control

Research on Flexible Centroid Measurement Method for Segments of Large-Thrust Carrier Rocket

Research on Measurement of Mass, Centroid and Eccentricity of Large-scall Axisymmetric Body

A Capacitive Flexible Weighing Sensor and Weighing Measurement

Precision Gravity Center Position Measurement System for Heavy Vehicles

Study on Mass Properties Measurement Error Compensations Based on Kinematics Model

Measurement of Tiny Moment of Inertia Based on Flexure Hinge for Automobile Collision Testing

Method for Translation and Rotation Decoupling of Test Mass in Full-Maglev Vertical Superconducting Gravity Instruments

Center of Gravity Position Estimation of Counterbalanced Forklift Truck Based on Multi Model Data Fusion

Development of High Precision Gravity Center Position Measurement System for Large Heavy Vehicles