Abstract:To recover Dy from LiCl-KCl melt, the electroreduction mechanism of Dy(III) on liquid Pb electrode was first studied by CV and Tafel methods. Dy(III) was reducted on liquid Pb electrode at about −1.35 V which is more positive than that on W electrode due to the formation of Dy(Pb) solid solution: Dy(III) + Pb + 3e− = Dy(Pb). Tafel method was used to evaluate the exchange current density (j0) and charge transfer coefficient (α) of Dy(III)/Dy(Pb) couple on liquid Pb electrode, the influence of different scanning speeds and temperatures on j0 were studied. The linear dependence of j0 as a function of temperature was observed, from which the activation energy associated with Dy(III)/Dy(Pb) couple was also obtained. Then, the reduction process of Dy(III) on the Pb film coated on the W electrode was also performed to obtain more information of the Pb-Dy intermetallic compounds. Electrochemical signals associated with the formation of Pb3Dy, Pb2Dy, Pb4/5Dy and Pb3/5Dy, were observed. The deposition potentials and equilibrium potentials of different Pb-Dy intermetallic compounds were obtained, which are more positive than those of Dy(III) on W electrode. Thermodynamic properties of Pb-Dy intermetallic compounds at 713 K–803 K were calculated employing the determined equilibrium potentials. The metallic Dy was recovered through galvanostatic and potentiostatic electrolysis on liquid Pb cathode and the products were detected by SEM-EDS and XRD. The recovered Dy was found to be in the form of Pb3Dy intermetallic compound.

Electrochemical Preparation of DyFe2 Alloy from the Solid Mixture of Dy2O3 and Fe2O3 in Molten CaCl2

Electrochemical Behavior of Dy(III) and Dy-Fe Alloys Preparation by Co-Reduction in Molten Fluoride Salts

Direct electrochemical preparation of CeCo_5 alloy from mixed oxides

Electrochemical Behavior of Dy(III) and Formation of Dy-Zn Alloy by Co-Reduction with Zn(II) in Eutectic NaCl-KCl Melts

Electro-Reduction of Ilmenite to Fe<sub>x</sub>Ti Alloys in Molten CaCl<sub>2</sub>

Influence of the material processing on the electrochemical properties of cobalt-free Ml(NiMnAlFe)5 alloy

Electrodeposition of magnesium–lithium–dysprosium ternary alloys with controlled components from dysprosium oxide assisted by magnesium chloride in molten chlorides

Electrochemical Behaviors of Dy(III) and Its Co-Reduction with Al(III) in Molten LiCl-KCl Salts

The role of electrolyte ratio in electrodeposition of nanoscale Fe Cr alloy from choline chloride-ethylene glycol ionic liquid: A suitable layer for corrosion resistance

Preparation and electrochemical properties of FeO3-Sm0.2Ce0.8O3 composite cathodes

Direct Electrolytic Preparation of Cerium/nickel Hydrogen Storage Alloy Powder in Molten Salt

Preparation of FeCoNiCrMn High Entropy Alloy by Electrochemical Reduction of Solid Oxides in Molten Salt and Its Corrosion Behavior in Aqueous Solution

Direct Electrosynthesis of Fe-TiC Composite from Natural Ilmenite in Molten Calcium Chloride

Fe-Doped Ceria-Based Ceramic Cathode for High-Efficiency CO2 Electrolysis in Solid Oxide Electrolysis Cell

Direct Electrodeposition of High-Purity Iron from Fe2O3 in Molten Calcium Chloride

Electrochemical recovery of dysprosium from LiCl-KCl melt aided by liquid Pb metal

Electrochemical Synthesis of CoFe2O4 Thin Films

On the formation of dendritic iron from alkaline electrochemical reduction of iron oxide prepared for metal fuel applications

Influences of Synthesis Route and Preparation Process on the Electrochemical Properties of Fe-doped Strontium Cobaltite

Preparation of FexCe1-xOy Solid Solution and Its Application in Pd-only Three-Way Catalysts

Highly Active and Durable Ordered Intermetallic PdFe Electrocatalyst for Formic Acid Electrooxidation Reaction