Abstract:The titanium alloy components utilized in the aviation field are typically large in size and possess complex structures. By utilizing multiple additive manufacturing processes, the precision and efficiency requirements of production can be met. We investigated the hybrid additive manufacturing of Ti-6Al-4V using a combination of cold metal transfer additive manufacturing (CMTAM) and laser metal deposition (LMD), as well as the feasibility of using the CMT-LMD hybrid additive manufacturing process for fabricating Ti-6Al-4V components. Microstructural examinations, tensile testing coupled with digital image correlation and dynamic compressive experiments (by the split Hopkinson pressure bar (SHPB) system) were employed to assess the parts. The results indicate that the interface of the LMD and CMTAM zone formed a compact metallurgical bonding. In the CMTAM and LMD zone, the prior-β grains exhibit epitaxial growth, forming columnar prior-β grains. Due to laser remelting, the CMT-LMD hybrid additive zone experiences grain refinement, resulting in equiaxed prior-β grains at the interface with an average grain size smaller than that of the CMTAM and LMD regions. The microstructures reveal significant differences in grain orientation and morphology among the zones, with distinct textures forming in each zone. In the CMT-LMD hybrid zone, due to interfacial strengthening, strain concentration occurs in the arc additive zone during tensile testing, leading to fracture on the CMTAM zone. Under high-strain-rate dynamic impact conditions, the LMD region exhibits ductile fracture, while the CMTAM zone demonstrates brittle fracture. The hybrid zone combines ductile and brittle fracture modes, and the CMT-LMD hybrid material exhibits superior dynamic impact performance compared to the single deposition zone.

Microstructure and Mechanical Properties of As-Deposited and Heat Treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) Alloy Fabricated by Laser Melting Deposition

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Microstructural evolution and mechanical properties of Ti55531–0.5Nb fabricated by selective laser melting under different heat treatments

Additive manufacturing of titanium alloys with enhanced strength and uniform ductility via multi-element alloying

Microstructure and High-Temperature Properties of TC31 Alloy Manufactured by Laser Melting Deposition

Microstructure and mechanical properties of a newly developed Ti-6Al-2Mo-2Sn-2Zr-2Cr-2V alloy fabricated by laser directed energy deposition

Microstructure And Tensile Properties Of Laser Melting Deposited Ti-5al-5mo-5v-1cr-1fe Near Beta Titanium Alloy

Microstructure and Mechanical Properties of An Ultrahigh-strength Titanium alloy Ti-4.5Al-5Mo-5V-6Cr-1Nb Prepared Using Laser Directed Energy Deposition and Forging: A Comparative Study

Heat-treatment induced microstructural evolution and enhanced mechanical property of selective laser melted near β Ti-5Al-5Mo-5 V-3Cr-1Zr alloy

Microstructure and mechanical properties of laser additive manufactured novel titanium alloy after heat treatment

Microstructures and Mechanical Behaviors of a Directional Lamellar Ti-48Al-2Cr-2Nb Alloy Produced by Laser Additive Manufacturing

Microstructure and Mechanical Property of Ti–5Al–5Mo–5V–3Cr–1Zr Alloy Fabricated by Selective Laser Melting with a Preheated Substrate

Microstructure Evolution and Mechanical Properties of Laser Additive Manufactured Ti–5Al–2Sn–2Zr–4Mo–4Cr Alloy

Solidification Microstructure and Mechanical Properties of Laser Additive Manufactured Near-α Ti-6Al-3Nb-2Zr-1Mo Titanium Alloy

Laser additive manufacturing of new α+β titanium alloy with high strength and ductility

Study of microstructure and compressive strength of a novel Ti-0.75Al-9.5V alloys manufactured by laser deposition melting

Obtaining heterogeneous α laths in selective laser melted Ti–5Al–5Mo–5V–1Cr–1Fe alloy with high strength and ductility

Influence of Heat Treatment on Microstructure and Tensile Properties of Selective Laser Melting Metastable Ti55531-0.5Nb Alloy

Titanium Alloy Components Fabrication by Laser Depositing TA15 Powders on TC17 Forged Plate: Microstructure and Mechanical Properties

Hybrid Fabrication of Cold Metal Transfer Additive Manufacturing and Laser Metal Deposition for Ti6Al4V: The Microstructure and Dynamic/Static Mechanical Properties

Additively manufactured β-Ti5553 with laser powder bed fusion: microstructures and mechanical properties of bulk and lattice parts