Abstract:Most traditional rigid grippers can cause damage to the surface of objects in actual production processes and are susceptible to factors such as different shapes, sizes, materials, and positions of the product. This article studies a flexible finger for flexible grippers, more commonly described as PneuNet, designs the structure of the finger, discusses the processing and manufacturing methods of the flexible finger, and prepares a physical model. The influence of structural parameters such as the thickness of the flexible finger and the angle of the air chamber on the bending performance of the finger was analyzed using the Abaqus simulation tool. An RBF-PID control algorithm was used to stabilize the internal air pressure of the flexible fingers. A flexible finger stabilization experimental platform was built to test the ultimate pressure, ultimate bending angle, and end contact force of the fingers, and the simulation results were experimentally verified. The results show that when the thickness of the flexible finger is 2 mm and the air chamber angle is 0 deg, the maximum bending angle of the flexible finger can reach about 136.3°. Under the same air pressure, the bending angle is inversely correlated with the air chamber angle and finger thickness. The experimental error of the bending angle does not exceed 3%, which is consistent with the simulation results as a whole. When the thickness is 2 mm, the maximum end contact force can reach about 1.32 N, and the end contact force decreases with the increase in the air chamber angle. The RBF-PID control algorithm used has improved response speed and a better control effect compared to traditional PID control algorithms. This article provides a clear reference for the application of flexible fingers and flexible grippers, and this research method can be applied to the analysis and design optimization of other soft brakes.

Development of Bolt Screwing Tool Based on Pneumatic Slip Ring

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

Automated Holding and Screwing Mechanism for Bolts

A Mechanical Screwing Tool for 2-Finger Parallel Grippers -- Design, Optimization, and Manipulation Policies

Design of A Novel Rotary-Linear Pneumatic Actuator Integrated with Ultrasonic Motion Control Mechanism

Structure design and finite element analysis of box type cargo picking robot clamp type end effector

Design And Development of Pneumatic Actuated Robotic Arm with Multipurpose Gripper

Design and Optimization of Electromagnetically Driven End-Effector

Design and Analysis of a Robotic End-Effector for Automated Hi-Lok Nut Installation

Design Of An End-Effector For Spacecraft Automatic Assembly Robot

Structural Design and Control Performance Study of Flexible Finger Mechanisms for Robot End Effectors

Design of squeezing-tube-driven pump for soft pneumatic robotics based on spiral spring winding

Design, Analysis, and Test of a Novel Cylinder-Driven Mode Applied to Microgripper

Design and Analysis of Double-station Fixture with Rolling/Sliding-toggle Force Amplifier Mechanism

Design and Analysis for a Late-model Ball Socket Device

A collaborative robotic screw assembly system using 6-pus parallel mechanism

Pneumatic-Electric Hybrid Drive Robot Hand for Both Powerful Grasping and Dexterous Manipulation Using Passive Clutch Mechanism

A Novel Approach for Flexible Manipulator Conducting Screwing Task Based on Robot–environment Contact Classification

Design and Analysis of 7-DOF Cable-Driven Manipulator

Development of a linear decoupling cable-driven manipulator with independent driving joints ,

Invention of smart tightening tool for directly controlling the preload of bolted joints