Abstract:Tensile machine is a very sophisticated test equipment, which can test the mechanical properties of some materials. In the drawing machine, the clamping device is to prevent the relative displacement and vibration phenomenon in the process of tensile test. The clamping device is the most important part of the structure of the test machine, and the main task of the clamping device is to control the degree of freedom of the specimen needs to be clamped, so as to further add loads to the various specimens to be held, and finally complete the mechanical property test of the material. But at present, the existing fixture mechanism is mainly hydraulic, pneumatic, mechanical fixture. At present, the existing mechanical fixture still has bending stress during the clamping process, which will affect the accuracy of the experiment. Therefore, a clamping mechanism with adjustable clamping force and flat pushing is designed. An electric control type fixture mechanism is very rare, so in this paper, an electrically controlled fixture is designed on this basis. The main contents are as follows: (1) On the basis of the existing fixture types, the working mode of the fixture is studied, and the working principle related to the fixture is mastered. (2) The main components of the fixture mechanism are analysed, the design scheme is determined, and the selection of the components of the drive part and the selection of the related components within the fixture mechanism is completed. ( 3) The force analysis of the main body of the fixture is carried out by using theoretical mechanics knowledge, and the relevant calculations are completed. The solid modeling of the whole mechanism is completed by using SolidWorks. The force analysis of key parts is carried out by using ANSYS software, and the correctness and safety of material selection and design are verified. The main parts of the fixture mechanism to complete the corresponding force analysis, and the theoretical calculation results are compared and verified, and finally realize the electric control of the fixture mechanism and complete the design of the fixture mechanism.

Design and Analysis for a Late-model Ball Socket Device

A New Principle and Device for Large Aircraft Components Gaining Accurate Support by Ball Joint

An Adaptive Posture Following and Keeping Fixture and Experiments

A new method for automatic shaft-hole assembly of aircraft components

An Adaptive Posture Following and Keeping Fixture Based on Aerostatic Bearing and Universal Ball Joint for Aircraft Digital Assembly

A New Posture Following and Keeping Fixture for Aircraft Assembly

Posture Alignment Internal Force in Three-Axis Actuators Based Assembly System for Large Aircraft Parts

End Stiffness Modeling for Automatic Horizontal Dual-Machine Cooperative Drilling and Riveting System

Design of DOB-based Riveting Force Controller for Dual-Machine Horizontal Drilling and Riveting System

Design and Evaluation of a Novel Self-Locking Quick Release Mechanism Featured by Heavy Load, Fast Response, and High Security

Accurate Clamping Method of Multipoint Flexible Fixture for Large Complex Surface

Design and Research of Intelligent Fixture for Drawing Machine

Research on Rapid and Accurate Fixture Design for Non-Intervention Machining of Complex Parts

Design and Analysis of Double-station Fixture with Rolling/Sliding-toggle Force Amplifier Mechanism

ON THE DESIGN OF CONTACT MEMBER SURFACE SHAPE OF BOLTED JOINTS TO MINIMIZE CLAMPING LOAD LOSS

Design and Analysis of a Drilling Fixture

Structural Design and Finite Element Analysis of Flexible Clamping Element

Structure design and finite element analysis of box type cargo picking robot clamp type end effector

Optimum Design of Clamp Device for Inchworm Actuator

Design And Analysis Of A Novel Haptic Device

Development of Clamp Type-Valve Locking Device to Improve Clamping Force