Abstract:Titanium-clad (TC) bimetallic steel plate is a composite steel plate manufactured by metallurgically bonding a titanium cladding layer to a base structural carbon steel plate commonly through hot-rolling process. Such advanced bimetallic product takes advantages of the weldability, formability, thermal conductivity and good mechanical properties of structural carbon steel and the excellent corrosion and impact resistance of titanium in a symbiotic fashion, so it possesses structural performance, environmental and economic benefits compared with pure structural carbon steel and titanium. TC bimetallic steels have been applied wisely in many engineering structures, but their research studies in engineering application in the open literature are still very limited. The aim of this paper is to present an experimental study for investigating the material properties and stress-strain curves of TC bimetallic steels. A series of experimental tests including tensile coupon tests, bend tests, Charpy impact tests and hardness tests on the TC bimetallic steel specimens are undertaken and reported. Their basic mechanical properties and stress-strain curves are obtained. The influence of the clad ratio that is defined as the ratio of the thickness of cladding layer to the total plate thickness on the stress-strain curves are studied. Through the interpretation of the collected experimental data and supplementary finite element analysis data of tensile coupon tests, a three-stage model for predicting the stress-strain curves of the TC bimetallic steels over full range of tensile strain are developed. The proposed model is defined by using the four basic parameters including three basic Ramberg-Osgood parameters and an exponent parameter, together with some additional parameters that can be expressed in terms of these basic parameters. The predictive expressions for the basic and additional parameters are also proposed in this study. The accuracy of the proposed model is demonstrated by comparing its predictions with the experimental stress-strain curves of the TC bimetallic steels with various clad ratios.

Mechanical Properties of Stainless-Clad Bimetallic Steel at Elevated Temperatures

Material Tests of 316L Austenitic Stainless-Clad Steel at Elevated Temperatures

Mechanical properties of stainless-clad bimetallic steel bars exposed to elevated temperatures

Post-fire Material Properties of Stainless-Clad Bimetallic Steel

Deterioration of Mechanical Properties of Novel Constructional Steel Material at Elevated Temperatures

Behavior of High Strength Structural Steel at Elevated Temperatures

Effect of High Temperature Exposure and Strain Rate on Mechanical Properties of High-Strength Steel Rebars

Experimental investigation of cold-formed steel material at elevated temperatures

Behaviour of constructional stainless steel at elevated temperatures

Stress–strain curves for stainless steel at elevated temperatures

Low-cycle Fatigue Behaviour and Fracture Feature of Stainless-Clad Bimetallic Steel

High Strain Rate Behaviour of Stainless-Clad Bimetallic Steel

Cyclic Behaviour and Modelling of Stainless-Clad Bimetallic Steels with Various Clad Ratios

Mechanical properties and modelling of superior high-performance steel at elevated temperatures

Relation between the Metallographic Structure and Mechanical Properties of a Bimetallic Steel Bar after Fire

Low-cycle fatigue properties of bimetallic steel bars after exposure to elevated temperature

Post-fire performance of bonding interface in explosion-welded stainless-clad bimetallic steel

Mechanical Properties and Microstructures of Steel-basalt Hybrid Fibers Reinforced Cement-based Composites Exposed to High Temperatures

Corner Properties Of Cold-Formed Steel Sections At Elevated Temperatures

Material Properties and Stress-Strain Curves for Titanium-Clad Bimetallic Steels

Behaviour of Cold-Formed Stainless Steel Beams at Elevated Temperatures