Abstract:Lithium metal is considered as one of the most promising anode candidates for high-energy batteries [1-3]. However, safety concerns induced by the formation of Li dendrites largely hinder the practical application of lithium-metal batteries [4]. It is anticipated that the use of non-flammable inorganic solid-state electrolytes can resolve these safety issues [5], but solid ceramic electrolytes generally suffer from poor physical contact with the electrode and poor electro-/chemical stability at the electrolyte|electrode interface [6]. Herein, we report on a thin and flexible hybrid electrolyte composed of NASICON-type Li1.3Al0.3Ti1.7(PO4)3 (LATP), a polymer binder, and a small amount of an ionic liquid-based electrolyte. To reinforce the interfacial stability between LATP and Li, we coat an ultrathin polysiloxane-based single-ion conducting polymer (PSiO) on the Li metal surface via a simple dip-coating method. The implementation of PSiO-coated Li (PSiO@Li) in symmetric PSiO@Li||PSiO@Li cells enables a substantial extension of the cycle life, yielding >2,000 h of stable lithium stripping-plating. The full-cells comprising PSiO@Li as the negative electrode, LiNi0.88Co0.09Mn0.03O2 (NCM88) as the positive electrode active material, and the aforementioned hybrid electrolyte exhibit substantially enhanced rate capability at high dis-/charge rates above 0.5C and greatly prolonged cycle life at 1C. The superior performance achieved herein is mainly attributed to: (1) the prevented direct contact between LATP and Li, thus avoiding the reduction of LATP and the formation of mixed ion-electron conducting interphases; (2) the regulated Li+ flux at the electrode|electrolyte interface, ensuring homogeneous Li+ stripping-plating; and (3) the promoted intimate contact between PSiO and Li via the formation of Si−O−Li bonds. References [1] T. Li, X.-Q. Zhang, P. Shi, Q. Zhang, Joule, 3 (2019) 2647-2661. [2] B. Horstmann, J. Shi, R. Amine, M. Werres, X. He, H. Jia, F. Hausen, I. Cekic-Laskovic, S. Wiemers-Meyer, J. Lopez, D. Galvez-Aranda, F. Baakes, D. Bresser, C.-C. Su, Y. Xu, W. Xu, P. Jakes, R.-A. Eichel, E. Figgemeier, U. Krewer, J.M. Seminario, P.B. Balbuena, C. Wang, S. Passerini, Y. Shao-Horn, M. Winter, K. Amine, R. Kostecki, A. Latz, Energy Environ. Sci., 14 (2021) 5289-5314. [3] S. Wang, P. Xiong, J. Zhang, G. Wang, Energy Storage Materials, 29 (2020) 310-331. [4] Z. Yu, Y. Cui, Z. Bao, Cell Rep. Phy. Sci., 1 (2020) 100119. [5] S. Xin, Y. You, S. Wang, H.-C. Gao, Y.-X. Yin, Y.-G. Guo, ACS Energy Lett., 2 (2017) 1385-1394. [6] A. Banerjee, X. Wang, C. Fang, E.A. Wu, Y.S. Meng, Chem. Rev., 120 (2020) 6878-6933.

Improvement of Preparation Process for Li-ion Conducting Membranes Composed of Monolayered Inorganic Electrolyte Particles and Insulating Polymer Matrix

Aqueous Tape Casting Phosphate Ceramic Electrolyte Membrane for High Performance All Solid-State Lithium Metal Battery

Preparation and Properties of Gel Membrane Containing Porous PVDF-HFP Matrix and Cross-Linked PEG for Lithium Ion Conduction

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Effect of Lithium Salt Concentration on Materials Characteristics and Electrochemical Performance of Hybrid Inorganic/Polymer Solid Electrolyte for Solid-State Lithium-Ion Batteries

Preparation and Study of a Simple Three-Matrix Solid Electrolyte Membrane in Air

Covalent Organic Frameworks Interfacial Modification of Ceramic Electrolytes for Enhanced Electrochemical Performance

Improving Li-ion interfacial transport in hybrid solid electrolytes

In Situ Gelation of a 1,3-Dioxolane Dual-Permeable Porous Tandem Framework with Excellent Interfacial Stability to Power Long-Cycling Solid-State Lithium Metal Batteries

Single-Ion-Conducting "Polymer-in-Ceramic" Hybrid Electrolyte with an Intertwined NASICON-Type Nanofiber Skeleton

High Li+ Conductivity of Li1.3+xAl0.3−xMgxTi1.7(PO4)3 with Hybrid Solid Electrolytes for Solid‐State Lithium Batteries

Multilayer structure solid-state electrolyte composite membranes for long-life quasi-solid-state battery

Elucidating the Mechanism Involved in the Performance Improvement of Lithium‐Ion Transition Metal Oxide Battery by Conducting Polymer

High-performance lithium metal batteries based on composite solid-state electrolytes with high ceramic content

Polymer Composite Electrolytes Membrane Consisted of Polyacrylonitrile Nanofibers Containing Lithium Salts: Improved Ion Conductive Characteristics and All‐Solid‐State Battery Performance

Reinforcing the Li|Li1.3Al0.3Ti1.7(PO4)3 Interfacial Stability by an Ultrathin Multifunctional Polysiloxane-Based Single-Ion Conducting Polymer

Advancements in Quasi-Solid-State Li Batteries: A Rigid Hybrid Electrolyte Using LATP Porous Ceramic Membrane and Infiltrated Ionic Liquid

High performance solid state lithium batteries with a continuous homogeneous Li + transmission channels

Enhanced Interphase Ion Transport via Charge‐Rich Space Charge Layers for Ultra‐Stable Solid‐State Lithium Metal Batteries

Design, fabrication and application of PEO/CMC-Li @PI hybrid polymer electrolyte membrane in all-solid-state lithium battery

A Hybrid LiCl/LixSn Conductive Interlayer to Unlock the Potential of Solid‐State Lithium Metal Batteries