Abstract:Al/SiC composites with volume fractions of SiC between 0.55 and 0.71 were made from identical tapped and vibrated powder preforms by squeeze casting (SC) and by two different setups for gas pressure infiltration (GPI), one that allows short (1–2 min) liquid metal/ceramic contact time (fast GPI) and the other that operates with rather long contact time, i.e., 10–15 min, (slow GPI). Increased liquid metal–ceramic contact time is shown to be the key parameter for the resulting thermal and electrical conductivity in the Al/SiC composites for a given preform. While for the squeeze cast samples neither dissolution of the SiC nor formation of Al4C3 was observed, the gas pressure assisted infiltration led inevitably to a reduced electrical and thermal conductivity of the matrix due to partial decomposition of SiC leading to Si in the matrix. Concomitantly, formation of Al4C3 at the interface was observed in both sets of gas pressure infiltrated samples. Longer contact times lead to much higher levels of Si in the matrix and to more Al4C3 formation at the interface. The difference in thermal conductivity between the SC samples and the fast GPI samples could be rationalized by the reduced matrix thermal conductivity only. On the other hand, in order to rationalize the thermal conductivity of the slow GPI a reduction in the metal/ceramic interface thermal conductance due to excessive Al4C3-formation had to be invoked. The CTE of the composites generally tended to decrease with increasing volume fraction of SiC except for the samples in which a large expansive drift was observed during the CTE measurement by thermal cycles. Such drift was essentially observed in the SC samples with high volume fraction of SiC while it was much smaller for the GPI samples.

Influence of Interface Thermal Resistance on Thermal Conductivity of SiC/Al Composites

Effects of La and Ce on Microstructure and Properties of SiC/Al Composites

Effect of Interface Evolution on Thermal Conductivity of Vacuum Hot Pressed SiC/Al Composites

Tailoring the thermophysical properties of porous SiC framework reinforced Al-Mg-Si composites by Si alloying content for thermal energy management

Study on the Influence of Ce and Mg on the Interface Behavior of SiC_p/Al Composites

Effect of Silicon Addition and Thermal History on the Thermal Expansion Behavior of Sic/Al Composites

The Effect of Rare Earth CeO2 on Microstructure and Properties of in Situ TiC/Al–Si Composite

Effects of SiC Content on the Mechanical and Thermophysical Properties of 3D Cf/SiC–Al Composites

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Influence of processing route on electrical and thermal conductivity of Al/SiC composites with bimodal particle distribution

Development of Al-25Si-xCe Alloy with High Conductivity and Low Expansivity for Thermal Management Purpose

Effect of CeO2 Content on Microstructure and Properties of SiCp/Al-Si Composites Prepared by Powder Metallurgy

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Manipulating interface bonding and microstructure via tuning interfacial reaction for enhancing mechanical property of in-situ TiC/Al cermets

Thermophysical Properties of SiC/Al Composites with Three Dimensional Interpenetrating Network Structure

Influence of At%Ce on the electronic structure and mechanical properties of Al-Ce compounds from first-principles calculations

Effect of Thermal Exposure on the Interface Microstructure and Interfacial Shear Strength of the SiC Fiber Reinforced AlFe5Si2 Matrix Composite

THE INTERFACIAL THERMAL STABILITY AND ELEMENT DIFFUSION MECHANISM OF SiCf/TC17 COMPOSITE

Effect of Infiltrated Eutectic AlSi on the Microstructure and Properties of C/C Composites

The Behavior and Effect of Rare Earth CeO2 on In-Situ TiC/Al Composite

Effect of Interfacial Structure on the Thermal Conductivity of Carbon Nanofibers Reinforced Aluminum Nitride Composites