Abstract:In this study, red mud-based CoFe2O4 (CoFe2O4/RM) was firstly prepared via a sol–gel method, and then activated through ball milling to obtain the catalyst of Ball-milled CoFe2O4/RM (BM-CoFe2O4/RM). The BM-CoFe2O4/RM catalyst was applied as a high-efficiency activator of peroxymonosulfate (PMS) for the degradation of lomefloxacin hydrochloride (LOM-HCl). The LOM-HCl (100 mg/L) could be removed 86.36 % after 12 min treatment under the optimal reaction parameters (BM-CoFe2O4/RM dosage of 1.33 g/L, PMS concentration of 5 mmol/L and nature pH 6.59 ± 0.1). The comparative experiments revealed that the apparent rate constant of LOM-HCl degradation of BM-CoFe2O4/RM (0.1091 min−1) was approximately 1.6 times that of CoFe2O4/RM (0.0701 min−1). A series of characterizations demonstrated that the physicochemical properties of CoFe2O4/RM, including defective structures, crystallinity of high active components, exposures of Co (II) and Fe (II) and electrical conductivity, could be improved via ball milling, causing the increase of the catalytic activity of CoFe2O4/RM. Combined with the results of Electron spin resonance (ESR), X-ray photoelectron spectrometer (XPS) and quenching experiments, the possible catalytic mechanism of PMS activated by BM-CoFe2O4/RM for LOM-HCl degradation was proposed. Combined with the density functional theory (DFT) calculation and liquid chromatography-mass spectrometer (LC-MS), the possible vulnerable sites and possible degradation pathways of LOM-HCl were obtained. The recycling experiments and XPS demonstrated that BM-CoFe2O4/RM had good stability, and the catalytic activity of the BM-CoFe2O4/RM after use could be regenerated by thermal treatment. The biological toxic experiment suggested that the toxicity of LOM-HCl solution treated by the BM-CoFe2O4/RM + PMS system was effectively reduced. The work not only provides a simple and high-efficiency method for improving the catalytic activity of CoFe2O4/RM, but also opens novel insights into the Ball-milled CoFe2O4/RM as an effective PMS activator for antibiotic wastewater treatment.

Activation of Persulfate by a Novel Magnetic CuFe2O4/Bi2O3 Composite for Lomefloxacin Degradation

Degradation of Lomefloxacin by MoS2/MIL-53(Fe, Cu) Catalyst in Heterogeneous Electro-Fenton Process

Enhanced Activation of Persulfate by AC@CoFe2O4 Nanocomposites for Effective Removal of Lomefloxacin

Synthesis of Magnetic CuO/MnFe2O4 Nanocompisite and Its High Activity for Degradation of Levofloxacin by Activation of Persulfate

Heterogeneously Catalyzed Persulfate with Activated Carbon Coated with CoFe Layered Double Hydroxide (Ac@cofe-Ldh) for the Degradation of Lomefloxacin

Construction of Bi2O3/CuNiFe LDHs Composite and Its Enhanced Photocatalytic Degradation of Lomefloxacin with Persulfate under Simulated Sunlight.

Synthesis of magnetic NiFe2O4/CuS activator for degradation of lomefloxacin via the activation of peroxymonosulfate under simulated sunlight illumination

Enhanced removal of lomefloxacin based on peroxymonosulfate activation by Co3O4/δ-FeOOH composite

Flower-like bentonite-based Co3O4 with oxygen vacancies-rich as highly efficient peroxymonosulfate activator for lomefloxacin hydrochloride degradation

Phosphorus-modified copper ferrite (P-CuFe2O4) nanoparticles for photocatalytic ozonation of lomefloxacin

Magnetic cobalt ferrite biochar composite as peroxymonosulfate activator for removal of lomefloxacin hydrochloride

Efficient Degradation of Lomefloxacin by Co-Cu-LDH Activating Peroxymonosulfate Process: Optimization, Dynamics, Degradation Pathway and Mechanism.

Red mud-based CoFe2O4 activated by ball milling as effective peroxymonosulfate activator for the degradation of lomefloxacin hydrochloride: Preparation & activation, application and degradation mechanism

Catalytic Degradation of Lomefloxacin by Photo-Assisted Persulfate Activation on Natural Hematite: Performance and Mechanism

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

In situ preparation of carbon-based Cu-Fe oxide nanoparticles from CuFe Prussian blue analogues for the photo-assisted heterogeneous peroxymonosulfate activation process to remove lomefloxacin

The MOF/LDH Derived Heterostructured Co3O4/MnCo2O4 Composite for Enhanced Degradation of Levofloxacin by Peroxymonosulfate Activation

CuFe2O4 supported on montmorillonite to activate peroxymonosulfate for efficient ofloxacin degradation

Activation of peroxymonosulfate by a stable Co-Mg-Al LDO heterogeneous catalyst for the efficient degradation of ofloxacin

Insight into catalytic activation of bisulfite for lomefloxacin degradation by simple composite of calcinated red mud

Enhanced activation of persulfate by magnetic NiFe2O4@CuO coupled with ultrasonic for degradation of oxytetracycline: Activation mechanism and degradation pathway