Abstract:In this study, red mud-based CoFe2O4 (CoFe2O4/RM) was firstly prepared via a sol–gel method, and then activated through ball milling to obtain the catalyst of Ball-milled CoFe2O4/RM (BM-CoFe2O4/RM). The BM-CoFe2O4/RM catalyst was applied as a high-efficiency activator of peroxymonosulfate (PMS) for the degradation of lomefloxacin hydrochloride (LOM-HCl). The LOM-HCl (100 mg/L) could be removed 86.36 % after 12 min treatment under the optimal reaction parameters (BM-CoFe2O4/RM dosage of 1.33 g/L, PMS concentration of 5 mmol/L and nature pH 6.59 ± 0.1). The comparative experiments revealed that the apparent rate constant of LOM-HCl degradation of BM-CoFe2O4/RM (0.1091 min−1) was approximately 1.6 times that of CoFe2O4/RM (0.0701 min−1). A series of characterizations demonstrated that the physicochemical properties of CoFe2O4/RM, including defective structures, crystallinity of high active components, exposures of Co (II) and Fe (II) and electrical conductivity, could be improved via ball milling, causing the increase of the catalytic activity of CoFe2O4/RM. Combined with the results of Electron spin resonance (ESR), X-ray photoelectron spectrometer (XPS) and quenching experiments, the possible catalytic mechanism of PMS activated by BM-CoFe2O4/RM for LOM-HCl degradation was proposed. Combined with the density functional theory (DFT) calculation and liquid chromatography-mass spectrometer (LC-MS), the possible vulnerable sites and possible degradation pathways of LOM-HCl were obtained. The recycling experiments and XPS demonstrated that BM-CoFe2O4/RM had good stability, and the catalytic activity of the BM-CoFe2O4/RM after use could be regenerated by thermal treatment. The biological toxic experiment suggested that the toxicity of LOM-HCl solution treated by the BM-CoFe2O4/RM + PMS system was effectively reduced. The work not only provides a simple and high-efficiency method for improving the catalytic activity of CoFe2O4/RM, but also opens novel insights into the Ball-milled CoFe2O4/RM as an effective PMS activator for antibiotic wastewater treatment.

Activation of peroxymonosulfate by a stable Co-Mg-Al LDO heterogeneous catalyst for the efficient degradation of ofloxacin

CuFe2O4 supported on montmorillonite to activate peroxymonosulfate for efficient ofloxacin degradation

Efficient Degradation of Ofloxacin by Magnetic CuFe2O4 Coupled PMS System: Optimization, Degradation Pathways and Toxicity Evaluation

Walnut Shell Loaded with Cobalt Ferrite as Efficient Peroxymonosulfate Activator to Degrade Ofloxacin

Facile synthesis of CoFeAl-layered double hydroxides activated by peroxymonosulfate for enhanced ciprofloxacin degradation

Effective removal of antibiotics from water by Cu2O/Co3O4-catalyzed peroxymonosulfate oxidation: catalytic performance and degradation mechanism

Flower-like bentonite-based Co3O4 with oxygen vacancies-rich as highly efficient peroxymonosulfate activator for lomefloxacin hydrochloride degradation

Preparation of Fe/C-Mt composite catalyst and ofloxacin removal by peroxymonosulfate activation

Co(CO3)0.5(OH)•0.11H2O as superior peroxymonosulfate activator for ciprofloxacin degradation via co-acting mechanism of low & high-valent cobalt and oxygen vacancy

Efficient ofloxacin degradation via peroxymonosulfate activation using an S-scheme MoS2/Co3O4 heterojunction composite under visible light: Performance and mechanistic insights

Activation of peroxymonosulfate by LaCO3OH coupled with N, S co-doped graphene for levofloxacin degradation

Unveiling the structure–activity relationships of ofloxacin degradation by Co 3 O 4 -activated peroxymonosulfate: From microstructures to exposed facets

Highly Efficient Peroxymonosulfate Electroactivation on Co(OH)2 Nanoarray Electrode for Pefloxacin Degradation

Covalent organic frameworks derived carbon supported cobalt ultra-small particles: C O and Co-N x complex sites activated peroxymonosulfate synergistically for efficient degradation of levofloxacin

Enhanced activation of peroxymonosulfate for ofloxacin rapid degradation and inhibition of metal leaching on LaNi0.6Co0.4O3 stably anchored at ZnO

Interfacial Engineering and Vacancy Design of Quasi-2D NiCoAl-LDH/Kaolin Hybrid for Activating Peroxymonosulfate to Boost Degradation of Antibiotics

pH-dependent oxidation mechanisms over FeCu doped g-C3N4 for ofloxacin degradation via the efficient peroxymonosulfate activation

Bio-synthesis of Co-doped FeMnOx and its efficient activation of peroxymonosulfate for the degradation of moxifloxacin

Enhanced electron transfer for activation of peroxymonosulfate via MoS2 modified iron-based perovskite

Red mud-based CoFe2O4 activated by ball milling as effective peroxymonosulfate activator for the degradation of lomefloxacin hydrochloride: Preparation & activation, application and degradation mechanism

A novel oxygen vacancies enriched Co Ni LDO catalyst activated peroxymonosulfate for the efficient degradation of tetracycline