Abstract:The pebble-bed high-temperature gas-cooled reactor (HTGR) is an advanced nuclear system with inherent safety. The nuclear reactor is operated in high-temperature ranges and its design temperature limit is 1600 °C. It is important to discuss the conduction–radiation heat transfer in the nuclear pebble bed during the thermal hydraulics analysis. Until now, the investigation mainly focuses on large-scale experimental tests, such as the Selbsttätige Abfuhr der Nachwärme (SANA) test by the International Atomic Energy Agency (IAEA), high temperature test unit (HTTU) under low gas pressure by North-West University of South Africa, and the pebble bed equivalent conductivity measurement (PBEC) under vacuum conditions for the high temperature gas-cooled reactor pebble bed module (HTR-PM) project by the Institute of Nuclear and New Energy Technology (INET) of Tsinghua University. In this work, a thermal resistance model was developed to calculate the conduction–radiation effective thermal conductivity of nuclear pebble beds. With the constitutive continuum modeling for conduction, contact resistance, coordination number, and void fraction are considered for physical expressions, and heat conduction in the packed bed will be enhanced directly by higher packing density and more contact. For thermal radiation dominated by the heat transfer process under high temperatures, a sub-cell model with an equivalent resistance network is developed to calculate the radiative exchange factor, and the void fraction effect is implemented by a modification term with thermal ray tracing results. At low packing density, because the thermal rays from the local pebble will travel a further distance until reaching the surrounding pebbles, the local sphere will be in contact with more particles by thermal radiation, and the heat transfer is enhanced. Compared with the empirical correlations, the present model is proven to be applicable for both dense and dilute cases. In the nuclear pebble bed, the present conduction–thermal radiation model agrees generally with experimental data under different temperatures and can be applied in the particle-scale CFD-DEM simulations. The present work provides a meaningful approach for conduction–thermal radiation heat transfer for engineering and nuclear pebble-bed design.

Repeatable experimental measurements of effective thermal diffusivity and conductivity of pebble bed under vacuum and helium conditions

Method and Validation for Measurement of Effective Thermal Diffusivity and Conductivity of Pebble Bed in High Temperature Gas-cooled Reactors

Data processing method for effective thermal diffusivity experiment of pebble bed in high temperature gas cooled reactors

Research on Improving the System Sensitivity for Hot Helium Leak Test

Heating system design and validation for the pebble bed effective thermal conductivity experiment in a high temperature gas cooled reactor

Theoretical Analysis of Effective Thermal Conductivity for the Chinese HTR-PM Heat Transfer Test Facility

Modeling of the Heat Transfer Characteristics of the Effective Thermal Conductivity Test Facility for High Temperature Gas-Cooled Reactors

Design of the Essential Material Test Equipment for the Pebble Bed Effective Thermal Conductivity Measurement Experiment

Numerical Methods and Simulation for Pebble Flows

Experimental Investigation of High Temperature Thermal Contact Resistance of Thin Disk Samples Using Infrared Camera in Vacuum Condition

Helium Permeability Measurement of Sic Ceramic Composites for Advanced Reactor Application

Measurement of pressure drop of purge gas flow in unitary and binary pebble beds

A Thermal Resistance Model of Conduction–thermal Radiation Heat Transfer in Pebble-Bed Nuclear Reactors

Simultaneous Measurement of Thermal Conductivity and Heat Capacity Across Diverse Materials Using the Square-Pulsed Source (SPS) Technique

Experimental Measurement of Stiffness Coefficient of High-Temperature Graphite Pebble Fuel Elements in Helium at High Temperatures

Experimental Study on Thermal Conductivity Measurement of Wet Unconsolidated Porous Media

Numerical Study of Pebble Recirculation in a Two-Dimensional Pebble Bed of Stationary Atmosphere Using LB-IB-DEM Coupled Method

An Experimental Study of Effective Thermal Conductivity of High Temperature Insulations

Thermal Design And Experimental Verification Of Double Helium Gap Conduction Test Facility

Improved Methods for Calculating the Neutron Diffusion Coefficient of General Pebble Bed

Research on Effective Thermal Conductivity of Hollow Glass Microspheres under Vacuum at Low Temperature