Abstract:In this study, a series of Cu–Ti3SiC2 composites with different Ti3SiC2 contents were prepared by spark plasma sintering. Their mechanical properties and electrical resistivity were investigated. Through analyzing the morphology and composition of the eroded regions, the effect of Ti3SiC2 content on the erosion behavior of Cu–Ti3SiC2 cathodes under vacuum arc was studied. Results show that the relative density and bending strength of the Cu–Ti3SiC2 composites decrease with the increasing Ti3SiC2 content, while the opposite holds for hardness and electrical resistivity. The morphology and phase composition of the erosion zone is dominated by the decomposition process and the amount of Ti3SiC2 in the cathode. Cu–Ti3SiC2 cathodes containing 10 mass%Ti3SiC2 or less displayed relatively flat eroded surface morphology. Cathodes with high Ti3SiC2 content suffered more serious erosion with voids, cracks, and severe decomposition of Ti3SiC2, all of which contribute to impairing the arc ablation resistance of the composite. Ti3SiC2 particles decomposed into TiC and Si vapor; eventually, this TiC also decomposed into Ti vapor and C, leaving a considerable amount of C on the arc affected cathode surface. Excess addition of Ti3SiC2 particles not only deteriorates the strength but also the electrical and thermal conductivity of the composite, both of which in turn harms the arc erosion resistance of the material. These results suggest that the optimal Ti3SiC2 content is below 10 mass% in the composite.

Arc ablation properties of Ti3SiC2 material

Arc Erosion Characteristics Evolution of Ag/Ti3SiC2 Composites During Repetitive Arc Breakdowns in SF6 Gaseous Medium

Erosion behavior of Ti3AlC2 cathode under atmosphere air arc

Arc Corrosion Behavior of Cu-Ti3AlC2 Composites in Air Atmosphere

Influence of Breakdown Voltages on Arc Erosion of A Ti3alc2 Cathode in an Air Atmosphere

High-voltage Arc Erosion Behavior and Mechanism of Ti3AlC2 under Different Ambient Atmospheres

Influence of Ti3SiC2 content on erosion behavior of Cu–Ti3SiC2 cathode under vacuum arc

Laser ablation behavior of a 2-D C/SiC-Ti3SiC2 composite

Physical, mechanical, and ablation properties of Cu–Ti3AlC2 composites with various Ti3AlC2 contents

Corrosion behavior and mechanism of Cu/Ti3AlC2 composites under arc discharge in different atmospheres

Arc Erosion Behavior and Mechanism of Cu/Ti3SiC2 Composites in C-C4f8/co2 and C-C4f8/n2 Mixtures

Comparison of Electrical Ablation Properties Between Pantograph Materials: Ti<sub>3</sub>AlC<sub>2</sub> and Cu-Ti<sub>3</sub>AlC<sub>2</sub>

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

Effects of Different Atmospheres on the Arc Erosion Behaviors of Ti3SiC2 Cathodes

Ablation behavior and mechanisms of 3D-Cf/Ta0.8Hf0.2C-SiC composite at temperatures up to 2500 °C

Influence of Ti 2 SnC content on arc erosion resistance in Ag–Ti 2 SnC composites

High Temperature Erosion Properties of Arc-Sprayed Coatings Using Various Cored Wires Containing Ti–Al Intermetallics

Study on the Ablation Behavior of C/SiC Composite Materials under the Action of Local Structural Thermal Sources

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Comparison of the Interfacial Reactions and Properties Between Ag/Ti3AlC2 and Ag/Ti3SiC2 Electrical Contact Materials

Long-term Ablation Behavior of Al4SiC4-YB4 SiC4-YB4 Modified Cf/ZrB2-SiC F /Zrb2-Sic Composites at 2600 °C