Abstract:This study aims at introducing the back stress of anisotropic strain-hardening into the crystal plasticity theory and demonstrating the rationality of this crystal plasticity model to describe the evolution of the subsequent yield surface of polycrystalline aluminum at the mesoscopic scale under complex pre-cyclic loading paths. By using two different scale finite element models, namely a global finite element model (GFEM) as the same size of the thin-walled tube specimen used in the experiments and a 3D cubic polycrystalline aggregate representative volume element (RVE) model, the evolution of the subsequent yield surface for different unloading cases after 30 pre-cycles is further performed by experiments and numerical simulations within a crystal plasticity finite element (CPFE) frame. Results show that the size and shape of the subsequent yield surfaces are extremely sensitive to the chosen offset strain and the pre-cyclic loading direction, which present pronounced anisotropic hardening through a translation and a distortion of the yield surface characterized by the obvious "sharp corner" in the pre-deformation direction and "flat" in the reverse direction by the definition of small offset strain, while the subsequent yield surface exhibits isotropic hardening reflected by the von Mises circle to be distorted into an ellipse by the definition of large offset strain. In addition, the heterogeneous properties of equivalent plastic strain increment are further discussed under different offset strain conditions. Modeling results from this study show that the heterogeneity of plastic deformation decreases as a law of fraction exponential function with the increasing offset strain. The above analysis indicates that anisotropic hardening of the yield surface is correlated with heterogeneous deformation caused by crystal microstructure and crystal slip. The crystal plasticity model based on the above microscopic mechanism can accurately capture the directional hardening features of the yield surface.

Loading path dependent distortional hardening of Mg alloys: Experimental investigation and constitutive modeling on cruciform specimens

Thermodynamically Consistent Directional Distortional Hardening of Mg Alloy: Experiments and Constitutive Modeling

Thermodynamically Consistent Constitutive Modeling of Distortional Hardening for Wrought Mg Alloys under Non-Proportional Loading

A Thermodynamically Consistent Distortional Hardening Model for AZ31 with Experimental Validation

Constitutive Modeling of Slip, Twinning and Detwinning for Mg Alloy and Inhomogeneous Evolution of Microstructure

Numerical simulation of plastic behavior and meso inhomogeneous deformation in AZ31 Mg alloy

The Anisotropic Distortional Yield Surface Constitutive Model Based on the Chaboche Cyclic Plastic Model.

Dynamic plasticity of AZ31 magnesium alloy: Experimental investigation and constitutive modeling

A Kinematic Hardening Constitutive Model for the Uniaxial Cyclic Stress–strain Response of Magnesium Sheet Alloys at Room Temperature

Mg-3Al-1Zn alloy deformed along different strain paths: Role of latent hardening

Influences of stress states and loading directions on the anisotropic fracture of magnesium alloy AZ31B sheet under tension-dominated forming conditions

A Generalized Thermodynamically Consistent Distortional Hardening Model for Mg Alloys

A New Constitutive Model for Thermal Deformation of Magnesium Alloys

On the Anisotropic Deformation of AZ31 Mg Alloy under Compression

Anisotropic-Asymmetric Hardening Characterization of BCC/FCC/HCP Metals: Experiments and Modeling

Characterization of Yield Surface Evolution of AZ31 from Shear to Equibiaxial Tension

Investigation of Yield Surfaces Evolution for Polycrystalline Aluminum after Pre-Cyclic Loading by Experiment and Crystal Plasticity Simulation

Phenomenological Constitutive Model of Magnesium Alloy Under Uniaxial Cyclic Loading

Polycrystalline Behavior Analysis of Extruded Magnesium Alloy AZ31

Evolving Hardening Behaviors of High Strength Steel Sheets under Altered Loading Paths

Mechanical responses and deformation mechanisms in the AZ31 magnesium alloy during cyclic bending