Abstract:Dispersion nuclear fuel elements have promising prospects to be used in advanced nuclear reactors and disposal of nuclear wastes. They consist of fuel meat and cladding, and the fuel meat is a kind of composite fuel in which the fuel particles are embedded in the non-fissile matrix. Prediction of the micro-thermo-mechanical behaviors in dispersion nuclear plates is of importance to their irradiation safety and optimal design. In this study, the heterogeneity of the fuel particles along the thickness direction in the fuel meat is considered. The 3D finite element models have been developed respectively for two cases: (1) variation of fuel particle-particle (PP) distances for the particles near the mid-plane of the fuel meat; (2) variation of the particle-cladding (PC) distances for the fuel particles near the interface between the fuel meat and the cladding. The respective finite strain constitutive relations are developed for the fuel particle, metal matrix and cladding. The developed virtual temperature method is used to simulate irradiation swelling of the fuel particles and irradiation growth of the metal cladding. Effects of the heterogeneous distributions of the fuel particles on the micro temperature fields and the micro stress-strain fields are investigated. The obtained results indicate that: (1) as a whole, the maximum Mises stress, equivalent plastic strain and first principal stress at the matrix between the two closest particles increase with decreasing the particle-particle (PP) distance; existence of large first principal stresses there may be the main factor that induces the matrix failure; (2) variation of the particle-cladding (PC) distance has remarkable effects on the interfacial normal stress and shear stress at the interface between the fuel meat and the cladding; the first principal stress at the cladding near the interface increases dramatically when the fuel particle is closer and closer to the cladding. Thus, the proper distance between the fuel particles and the one between the fuel particle and the cladding should be considered in the optimal design; (3) the micro temperature distribution in the fuel element is hardly affected. (C) 2011 Elsevier B.V. All rights reserved.

In-situ Fabrication of Dispersion Nuclear Fuel Pellets with a Core-Shell Structure

Fabrication of Dispersion Ceramic Nuclear Fuel bya Stereolithography-based Addictive Manufacturing Process

A Microfluidic-Assisted Fabrication of Size-Controlled Porose CeO2 Microspheres As an Analog Production of Nuclear Fuel Beads

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

DEM Simulation for Separating Coated Fuel Particles by Inclined Vibrating Plate

Fabrication of composite particles with core-shell structures by a novel processing

Investigation of the Vibrating Feeding System for Sphericity Separation of Coated Fuel Particles Using DEM

Prediction of the Micro-Thermo-mechanical Behaviors in Dispersion Nuclear Fuel Plates with Heterogeneous Particle Distributions

Pressureless Sintering of Large Sized Fully Ceramic Microencapsulated Fuel Pellets

Fabrication of Uniform Ce/Eu Oxide Microparticles by a Microfluidic Co-Sol-Gel Process As an Analog Preparation of MA-Bearing Ceramic Nuclear Fuel Particles

Manufacturing porous U-10Zr metallic fuels with controllable microstructure by volume control spark plasma sintering

Formation Of Core-Shell Structured Composite Microparticles Via Cyclic Gas-Solid Reactions

Fabrication of CeO2 by sol-gel process based on microfluidic technology as an analog preparation of ceramic nuclear fuel microspheres

Fabrication of Size-Controlled CeO2microparticles by a Microfluidic Sol–gel Process As an Analog Preparation of Ceramic Nuclear Fuel Particles

Segregation of chemical elements in the volume of powder particles during it's treatment as a method for the production of structurally graded powder materials

Fabrication of Α-Alo(oh)·sio2 with Core-Shell Structures by Heterogeneous Nucleation-and-growth Processing

Characterization of U–Nb–Zr dispersion fuel prepared by centrifugal atomization process

Fabrication of Composite Coating Spheres with Silica Sphere/titania Shell Structure by Heterogeneous Nucleation-and-growth Processing

Mechanical Behaviors of the Dispersion Nuclear Fuel Plates Induced by Fuel Particle Swelling and Thermal Effect I: Effects of Variations of the Fuel Particle Volume Fractions

Research on process control of intermittent electrodeposition for preparation of core-shell powder

Fabrication of Fe3O4 Core-Shell Polyhedron Based on a Mechanism Analogue to Ostwald Ripening Process