Abstract:This study presents a novel combined generative shaping and material-forming (GSM) approach for preparing tritium breeder units for fusion reactors using 3D printing technology. For the first time, defect-free lithium-rich Li4SiO4 porous structures were successfully prepared by combining photopolymerization and reaction sintering processes based on the use of low-cost Li2CO3 and SiO2 ceramic powders. Investigation was conducted on the preparation of the ceramic powder-based mixture slurry as well as the photopolymerization 3D printing and reaction sintering processes. Li4SiO4-based porous lattice ceramics with high purity, no obvious defects, and adjustable packing fraction were fabricated. The mechanical properties of the samples prepared with different packing fractions were then evaluated. The prepared samples showed better mechanical properties than the pebble bed structures with similar packing fractions. At a packing fraction of 92.10%, the crushing strength and elastic modulus reached 186.49±0.04 MPa and 16.47±0.03 GPa, respectively. These results show that the combination of photopolymerization 3D printing and reaction sintering processes based on the use of low-cost ceramic powders has significant advantages in terms of flexibility and efficiency in structure design and fabrication and cost-effectiveness in material forming with enhanced performance, providing a promising route to produce high-performance tritium breeder structures for fusion technologies. In particular, the present combined method also paves a promising generalized way to enable effective generative structure-shaping and material-forming in the advanced ceramic manufacturing industry, not to mention that the preparation of high-performance Li4SiO4 tritium breeder units for fusion technologies.

Highly efficient preparation of Li 2 O breeder materials with core‐shell structure by oil‐based granulation route

Preparation of Li4TiO4-Li2TiO3 core-shell ceramic pebbles with thick shells and high strength through an improved granulation method

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

Scalable Preparation of Hollow ZrO2 Microspheres Through a Liquid-Liquid Phase Reunion Assisted Sol-Gel Method

Preparation of Li4SiO4 pebbles with increased lithium content and crush load via molten salt assisted sintering

Efficient fabrication of high strength Li2TiO3 ceramic pebbles via improved rolling ball method assisted by sesbania gum binder

Fabrication of high strength Li-rich 2Li2TiO3–Li4SiO4 composite breeding ceramics at low-temperature by two-step sintering

Photopolymerization and reaction sintering enabled generative shaping and material-forming of complex ceramic structures with high performance

Hydrothermal synthesis and characterization of core/shell ALOOH microspheres

Recent Progress in Research of Solid Tritium Breeder Materials Li2TiO3: A Review

One-pot Template-Free Synthesis of Mesoporous Boehmite Core–shell and Hollow Spheres by a Simple Solvothermal Route

Manipulating Li2O atmosphere for sintering dense Li7La3Zr2O12 solid electrolyte

Fabrication of fine‐grained Li2TiO3 ceramic with enhanced performance using high‐energy ball milling

Preparation of battery-grade Li2CO3 efficiently by high shear dispersion at low temperature

Preparation of Li 4 SiO 4 pebbles with high strength and inhibited lithium volatilization via lithium alginate

Characterization of Li-rich Li2TiO3 ceramic pebbles prepared by rolling method sintered in air and vacuum

Low-temperature synthesis of Li2TiO3 tritium breeder ceramic pebbles by water controlled-release solvothermal process

A comprehensive study on Li4Si1−xTixO4 ceramics for advanced tritium breeders

Lithium/titanium ratio: A key factor on crystal structure and mechanical properties of lithium titanate pebbles for tritium breeder

Microfabrication of Li 4 SiO 4 pebbles with complex pore structure via digital light processing: Accuracy control and properties optimizing

Developing Preparation Craft Platform for Solid Electrolytes Containing Volatile Components: Experimental Study of Competition between Lithium Loss and Densification in Li7La3Zr2O12