Abstract:Ternary alloys consisting primarily of uranium, plutonium, and zirconium (U-Pu-Zr) are among the leading candidate fuel systems considered for fast spectrum nuclear reactors. Despite historical operation data from the testing of U-Pu-Zr rods in the Experimental Breeder Reactor-II, considerable uncertainty about the evolution of phases and microstructure across the ternary composition space exists. Due to sluggish kinetics and other difficulties in handling metal actinide specimens, quantitative measurements of phase-transitions in U-Pu-Zr alloys remain sparse in scientific literature, with most investigators reporting either phase-transition temperatures or phase identification data, but not both from the same specimens. The purpose of this paper is to critically compare experimental and calculated phase transition data and correlate with the microstructure and phase characterization data of as-cast and annealed U-Pu-Zr alloys. Phase transition peaks were measured using differential scanning calorimetry in the subsolidus regions (723−948 K) of three ternary U-Pu-Zr alloys with the same zirconium concentration but various U/Pu ratios. Overlapping peaks were deconvoluted using a Frazier-Suzuki peak fitting algorithm, and the critical peak temperatures and enthalpies were calculated. In general, increasing concentrations of Pu were associated with enhanced thermal stability of the body-centered cubic γ phase upon both heating and cooling. Experimental phase transition temperatures in this study tended to agree well with the predictions of the established ternary phase diagrams and other reported phase transition temperatures in literature. Additionally, the TAF-ID thermodynamic database was used to calculate a U-Pu-40 at.% Zr pseudobinary diagram as well as ternary diagrams from 773 −973 K. The equilibrium phase transition temperatures tended to be considerably lower than measured peak temperatures upon both heating and cooling. Recommendations for improving the quality of data in future U-Pu-Zr characterization studies are also discussed.

Characterization of U–Nb–Zr dispersion fuel prepared by centrifugal atomization process

Microstructure and radiation stability of nano-dispersoids in particle-reinforced FeCrAl alloys with different Zr concentrations

Mechanical Characterizations of the Dispersion U 3 Si 2 -Al Fuel Plate with Sandwich Structure

Advanced Characterization-Informed Framework and Quantitative Insight to Irradiated Annular U-10Zr Metallic Fuels

U-Si and U-Si-Ai Dispersion Fuel Alloy Development for Research and Test Reactors

Mechanical property and strengthening mechanism of ZrC nanoparticle dispersion-strengthened Mo containing FeCrAl alloys

First-principles calculations to investigate mechanical, thermal, oxidation and hydrogen properties of Y, Zr and Nb alloyed U 3 Si 2

A New Design of Composite Fuel with Zr-coated TRISO Particles Dispersed in Metal Matrix

Production of Zirconium-Niobium Alloys for Nuclear Reactors Fuel Rods via SHS Process

Evaluation of Sb-Nd and Te-Nd Phases within the U-Zr Fuel Matrix and Their Interactions with HT9 Alloy

The Effect of Niobium on the Mechanical and Thermodynamic Properties of Zirconium Alloys

Experiments, characterizations and analysis of a U3Si2–Al dispersion fuel plate with sandwich structure

High-Temperature Mechanical and Dynamical Properties of γ-(U,Zr) Alloys

Preparation and Melting of Zr-1.0Nb Alloy

Determining the effects of U/Pu ratio on subsolidus phase transitions in U-Pu-Zr metallic fuel alloys

Modeling of Zirconium Atom Redistribution and Phase Transformation Coupling Behaviors in U-10Zr-Based Helical Cruciform Fuel Rods under Irradiation

Research on preparation process for the in situ nanosized Zr(Y)O2 particles dispersion-strengthened tungsten alloy through synthesizing doped hexagonal (NH4)0.33·WO3

Effect of Al addition on the mechanical property and irradiation resistance of NbMoZr-based medium-entropy alloys

Homogenization and Growth Behavior of Second-Phase Particles in a Deformed Zr–Sn–Nb–Fe–Cu–Si–O Alloy

Assay of Zirconium and Americium in the Irradiated U-Zr Metal Alloy Fuel Slug

The irradiation behavior of atomized U-Mo alloy fuels at high temperature