Abstract:The present work investigated the influences of the variation of Si content and the minor amount of Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys systematically. Alloy compositions with Nb-21.6(Ti/Zr)-3.1Hf-(9.4–15.6)Si-6.3Cr-3.1Al-1.0B (at. %) were designed using a cluster formula approach to realize the substitution of similar elements, in which these alloys were solid-solutionized at 1573 K for 24 h and then aged at 1273 K for 24 h. It was found that all these aged alloys are mainly composed of BCC-Nb solid solution (Nbss), Nb 5 Si 3 and Cr 2 Nb phases, where the increase of Si content and the addition of Zr could significantly increase the volume fraction of Nb 5 Si 3 in a form of coarse and primary particles. Consequently, high-Si alloys possess outstanding mechanical property at high temperature, as evidenced by the fact that the yield strength ( σ YS = 373 MPa) at 1523 K of high-Si/Zr alloy containing 15.6 at. % Si and 1.6 at. % Zr is much higher than that ( σ YS = 266 MPa) of the low-Si alloy with 9.4 at. % Si and 0 Zr. It is mainly ascribed to the existence of primary Nb 5 Si 3 particles, besides the eutectic microstructure composed of Nbss and Nb 5 Si 3 , as well as fine Cr 2 Nb precipitates in Nbss. Moreover, a minor amount of Zr substitution for the Ti is conducive to the phase transition of α-Nb 5 Si 3 to γ-Nb 5 Si 3 . Thus, this high-Si/Zr alloy exhibits an improved oxidation resistance after 50 h-exposure at 1523 K, due to the lowest mass gain of about 80.9 mg/cm 2 . The constitutions of oxide scales in these alloys were characterized and compared, from which it was found that the better oxidation resistance is closely related to the formation of dense oxide scales. This work will provide a new approach to obtain an optimum combination of mechanical property and oxidation resistance of superalloys through multi-component alloying.

First-principles calculations to investigate mechanical, thermal, oxidation and hydrogen properties of Y, Zr and Nb alloyed U 3 Si 2

Effect of Nb and Cu on α/β Phase Transition Temperature and Corrosion Behavior of New Type Zirconium Alloys

Microstructural and Oxidation Effects of Nb Additions to U3Si2

The thermal and elastic properties of U3Si5 and their variations induced by incorporated aluminum

Theoretical investigations on the U2Mo3Si4 compound from first-principles calculations

Effect of solute Nb and Sn on self-interstitial atom defect in zirconium-based alloys by first-principles calculations

Structural, Electronic, Elastic and Thermal Properties of Cr-doped U3Si2: A DFT Study

Investigations on mechanical, thermodynamic and surface properties of U–Si alloys

First-principles investigations on the electronic structures of U 3 Si 2

First-principles study of point defects in U3Si2: effects on the mechanical and electronic properties

Effect of Al addition on the mechanical property and irradiation resistance of NbMoZr-based medium-entropy alloys

Pressure Tuned Structural, Electronic and Elastic Properties of U3Si2C2: A First Principles Study

Determination of Thermal Expansion, Defect Formation Energy, and Defect-Induced Strain of α-U Via ab Initio Molecular Dynamics

Nb speciation and microstructural characterization of the oxide layer formed on neutron-irradiated Zr-2.5 Nb alloy in high-temperature water

Effects of Si variation and Zr addition on the microstructure, oxidation resistance and mechanical property at 1523 K of Nb-Si-Ti/Zr/Hf-Cr/Al high-entropy superalloys

Point Defects Stability, Hydrogen Diffusion, Electronic Structure, and Mechanical Properties of Defected Equiatomic γ(U,Zr) from First-Principles

High-Temperature Mechanical and Dynamical Properties of γ-(U,Zr) Alloys

Stability and physical properties tuning via interstitials chemical engineering of Zr5Sn3: a first-principles study

Finite element based fuel performance investigation of U3Si2-FeCrAl design under normal and RIA conditions

Computational discovery of novel U-N-C ternary phases as promising accident-tolerant fuels

The Microstructural Characteristics and Mechanical Properties of Nb-16Si-22Ti-2Al-2Cr Alloys with Zr Addition