Study on the Alkoxylation of Camphene with 2-Methyl-1,3-propanediol
Huiqin Nie,Ruyin Xu,Hai Tao,Zheng Zhou,Zhibing Zhang
DOI: https://doi.org/10.13232/j.cnki.jnju.2015.04.006
2015-01-01
Abstract:The alkoxylation of camphene with 2-methyl-1,3-propanediol was carried out in the presence of anhydrous macroporous and strong acid cation exchange resins.The effects of various parameters,such as agitation speed, catalyst type,solvent,initial mass ratio of reactants,reaction temperature and reusability of catalysts,were investigated in a 250 mL glass stirred tank reactor in order to optimize the reaction conditions.The conditions for the alkoxylation of camphene with 2-methyl-1,3-propanediol under the catalytic action of anhydrous Lewatit2620 were optimized as follows:agitation speed was 400 r·min-1 ;initial mass ratio of camphene to 2-methyl-1,3-propanediol was 1.5∶1;catalyst loading based on the total mass of reactants was 20%;reaction temperature was 353 K and reaction time was four hours.Under these optimum conditions,the conversion of camphene was 78.80% and the selectivity of isobornyl hydroxyl isobutyl ether was 93.5%.Besides,the catalyst showed good catalytic activity after reusing by eight times.Through lengthening the reaction time,thermodynamic equilibrium constants at 333~370 K were derived.The UNIFAC group contribution method was used to calculate activity coefficients of reactants and to correct the nonideality of reactants.The equilibrium constants decreased with increasing temperature,which demonstrated the alkoxylation of camphene with 2-methyl-1,3-propanediol was exothermic.The equilibriumconstants based on concentration were significantly different from that based on activity,which indicated that it was necessary to take the nonideality of the mixture into account in calculation.Besides,the optimized reaction conditions were also verified in a 5 L double layer glass reaction kettle.From the perspective of conversion of camphene and se-lectivity of isobornyl hydroxyl isobutyl ether,result of the experiment in a 5 L layer glass reaction kettle is almost the same as that of the small-scale experiment,which providing evidence for industrial application by using industrial-grade camphene as the material.