Abstract:Compared with industrial used Pt- and Cr-based catalyst in dehydrogenation (DH) of light alkanes, the sulfide V-K/γ-Al2O3 catalyst reported in this study shows lower cost and toxicity, and significant DH performance. The yield to isobutene reached as high as 52.9%, which is among the highest reported to date. We attribute such high isobutene yield to the precise modulation of polymerization degree for vanadium species via doping of potassium and indicating that the synergy between vanadium species and acid sites is critical to enhance the DH performance. Our previous work showed sulfidation promoted the increase of DH performance for vanadium-based catalyst, and we go further in this study to explore the correlation between increased range of DH performance and the added potassium. The different loaded potassium leads to variation in sulfidation degree, affecting the properties of vanadium species and acid properties consequently. The potassium was distributed uniformly on surface of the sulfide vanadium-based catalyst and was predominantly bonded with the vanadium species rather than with the γ-Al2O3 support. With increasing the potassium amount from 0 to 3 wt%, the acid amount kept decreasing, and some specific strong acid sites appeared once adequate sulfur was introduced in the V-K/γ-Al2O3 catalyst. The characterization and DFT results both revealed that the doped potassium contributes to regulating the vanadium species in the oligomeric state. The synergy between vanadium species and acid properties was regulated by the added potassium simultaneously, and thus the DH performance was enhanced. This study provides promising strategy for preparation of environment-friendly model industrial DH catalyst.

Study on Stability of Ion-Exchange Resin Catalysts: Ii. Desulfonation During Isobutylene Dimerization

Evaluation of Strongly Acidic Ion-Exchange Catalysts and the Desulfonation Study in the Isobutylene Dimerization Reaction

Study on the Stability of Ion-Exchange Resin Catalysts: I. Tga As A Rapid Evaluating Method

Effect of Catalyst on the Molecular Structure and Thermal Properties of Isosorbide Polycarbonates

A Study of the Desulfurization Selectivity of a Reductive and Extractive Desulfurization Process with Sodium Borohydride in Polyethylene Glycol

An Insight into Effect of Methanol on Catalytic Behavior of Amberlyst 35 Resins for Alkylation Desulfurization of Fluid Catalytic Cracking Gasoline

Studies on n-butane isomerization reaction on solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalysts

Solvent-free preparation of well-dispersed and highly active CrOx/VOx/TiO2-SiO2 bimetallic catalyst for bimodal UHMWPE/ HDPE in-reactor blends

Influence of Channel, Construction and Brønsted Acid Sites on the Catalytic Conversion Pathways of Isobutane over MFI, TON and RFE Zeolites

Thermodynamic and Kinetic Study on the Catalysis of Isoamyl Acetate by a Cation-Exchange Resin in an Intensified Fixed-Bed Reactor.

Esterification of propionic acid with isopropyl alcohol over ion exchange resins: Optimization and kinetics

Study on influence factors of the end-group structures of low molecular weight polyisobutylene

Effect of Preparation Method on ZrO2-Based Catalysts Performance for Isobutanol Synthesis from Syngas

Selective Oligomerization of Isobutylene in Mixed C4 with Co/BETA-Loaded Molecular Sieve Catalysts

Isobutane dehydrogenation over high-performanced sulfide V-K/γ-Al2O3 catalyst: Modulation of vanadium species and intrinsic effect of potassium

Synthesis and Application of Monolithic Ion Exchange Resin

Study on the Alkoxylation of Dihydromyrcene over Cation Exchange Resins

Study on the Effect of Catalyst Properties on Residue Hydroconversion

Conversion of Cellulose to Levulinic Acid/Ester over an Acid Catalyst: Impacts of Dispersion of Hydrogen Ions on Polymerization Reactions

A Study on Styrene Polymerization in Coking Xylene with Benzoyl Peroxide as Initiator and Ionic Liquids as Catalyst

Isomerization Ofn-Butane over Deuterated Sulfated Zirconia