Abstract:With regards to field testing under a CO 2 -ECBM project, phase transition of CO 2 inevitably occurs under particular conditions during the injection process, which is obviously entangled with pressure and temperature distributions inside the wellbore. Nevertheless, due to that phase transition within wellbore was hard to be controlled and monitored, conventionally its transient influence had been neglected when reservoir simulations were undertaken. Numerical analysis studies on this topic still rarely exist, especially on the initial stage of injection during the stage when thermal equilibrium among CO 2 , wellbore, and its surrounding rock hasn't yet been reached. In terms of the Canadian project CSEMP (CO 2 storage and enhanced methane production), referring to its engineering background and field data, a "1D + Pseudo-1D" model was established and then the associated numerical simulation on its wellbore dynamics was undertaken using software OLGA. The specific features of CO 2 behavior within the wellbore were analyzed for transient pressure build-up during the initial stage of the operation. The accuracy of the modelling was first verified by the downhole data with regards to the 4-day CO 2 injection test. Secondly, the influences on the CO 2 phase state inside the wellbore from different cases of injection temperatures were analyzed. The results revealed that: in the short term, when the injection temperature is low, CO 2 may undergo a phase change process of "gas state–liquid state" at the bottom of the well; when the injection temperature is high, CO 2 at the well's bottom may go through a phase change process of "gas state–liquid state–gas state". As well, the simulation predicted that supercritical CO 2 might have existed at the bottom of the wellbore during the 19-day CO 2 injection. This is due to the work done by both gravitational potential energy and the compressibility of gas, which should have been considered in studying the field testing of the CSEMP project.

Estimation of Formation Thermal Properties Distribution from Temperature in CO 2 Storage Wells

Estimation of geological formation thermal conductivity by using stochastic approximation method based on well-log temperature data

Effects of CO2 Variable Thermophysical Properties and Phase Behavior on CO2 Geological Storage: A Numerical Case Study

CO 2 storage capacity estimation by considering CO 2 Dissolution: A case study in a depleted gas Reservoir, China

Modelling and Interpretation of a Temperature Drop in the Wellbore in Ordos CO2 Storage Project, China

Thermal Modeling of CO2 in the Injection Well and Reservoir at the Ordos CCS Demonstration Project, China

Flow and Thermal Modeling of CO2 in Injection Well During Geological Sequestration

Pressure Model and Calculation of Well Test for Gas Wells with CO2 Injection Considering Thermal Effect

Estimation of Oil Reservoir Thermal Properties Through Temperature Log Data Using Inversion Method

The Sensitivity Analysis of Wellbore Heat Transfer During the Co2 Injection Process

NUMERICAL INVESTIGATION OF KEY PARAMETER EFFECTS ON TEMPERATURE AND PRESSURE IN WELLBORE DURING CARBON DIOXIDE FRACTURING

Analysis for formation thermal properties of water injection well from temperature data

Impact of injection temperature and formation slope on CO2 storage capacity and form in the Ordos Basin, China

Numerical investigation on wellbore temperature and pressure during carbon dioxide fracturing

Numerical investigation of wellbore temperature and pressure fields in CO2 fracturing

The Sensitivity Analysis of Wellbore Heat Transfer during the CO<sub>2</sub> Injection Process

Study on wellbore fluid flow and heat transfer of a multilateral-well CO2 enhanced geothermal system

Wellbore temperature and pressure calculation model for coiled tubing drilling with supercritical carbon dioxide

The Feasibility of Heat Extraction Using CO2 in the Carbonate Reservoir in Shandong Province, China

Thermal Modelling In And Around A Co2 Injector

Analysis of CO2 phase transition within well-bore during injection into low-rank but relatively shallow coal seams